Hunter Fan 45041-01 Manual Do Utilizador

45041-01  •  09/30/09  •  Hunter Fan Company

5-1.  Partially install two canopy screws (about 2 full turns) in the 

hanger bracket.

5-2.  Raise the canopy over the hanger bracket. Align partially installed 

screws with key slots in canopy.

5-3.  Twist canopy clockwise to secure.
5-4.  Install third  & fourth canopy screw in round hole on canopy. 

Securely tighten all four screws.

5-5.  Using both hands, push the canopy trim ring up to the top of the 

canopy. 

5-6.  Twist canopy trim ring clockwise to secure the canopy.

Should you need to remove the canopy 
trim ring, follow these steps:
  1. Twist canopy trim ring counter 

clockwise until it releases from 
canopy.

Canopy Trim 

Ring

Canopy

Hanger Bracket

Canopy 

Screw