Hunter Fan 41081-01 Manual Do Utilizador

41081-01 • 08/04/09 • Hunter Fan Company

8 • Troubleshooting

Problem: Nothing happens; fan does not move.

1. Turn power on, replace fuse, or reset breaker. Turn wall switch on.
2. Loosen canopy, check all connections according to the Wiring the Fan section.
3. Push motor reversing switch firmly left or right to ensure that the switch is

engaged.

4. Pull the pull chain to ensure it is on.
5. Remove the shipping bumpers.

Problem: Noisy operation.

1. Tighten the blade bracket screws until snug.
2. Check to see if the blade is cracked. If so, replace all the blades.
3. Tighten all screws.

Problem: Excessive wobbling.

1. If your fan wobbles when operating, use the enclosed balancing kit and

instructions to balance the fan.

2. Tighten all blade iron screws.
3. Turn power off, support fan very carefully, and check that the hanger ball is

properly seated.

Problem: Lights dim when turned on or do not turn on

1. Check to make sure wattage of light bulbs installed match the specifications on

the light socket.

Problem: If the light on this fan shuts off suddenly.

1. Turn the power to the fan off at the wall switch. Wait 30 seconds,
then resume power to the fan.

If you need parts or technical assistance, please
call 888-830-1326 (In Canada, 1-866-268-1936) or
visit us at our web site at
http://www.hunterfan.com.

Hunter Fan Company
7130 Goodlett Farms Pkwy. #400
Memphis, Tennessee 38016