DeLonghi DEC 21 Manual Do Utilizador

Dehumidifier

5

1) Plug the appliance into a mains socket.

2) Check that the “tank full/tank missing” light         is off, if not

place the tank in the correct position or empty it if it’s necessary.

3) To easily select the right humidity level, we suggest you operate

as follows:

Use the function selector to choose        (for maximum dehumidi-
fying power) or        (for minimum dehumidifying power).
Turn the humidistat clockwise as far as it will go to the MAX position.
(The dehumidification standby light       comes on for the first 3
minutes after which the appliance starts dehumidifying).
Leave the unit on this setting until signs of excess moisture (e.g.
condensation on windows) decrease.
At this point select       or         and slowly turn the humidistat
knob anti-clockwise until the dehumidification light switches off.
The dehumidifier will then keep the humidity  at the selected level
automatically.

1) Plug the appliance into a mains socket.
2) It is possible to adjust the room temperature by  turning the

thermostat knob on one of the available position (MIN-MED-
MAX). If you wish to heat the room, set the thermostat to the
temperature  level desired.

3) Select the economy (      = 1250 W) or maximum (      = 2000

W) heating level  on the function selector.

To  easily select the right temperature level, we suggest you to
operate as follows:
Turn the thermostat to position MAX
When the temperature in the room has reached the required
level, slowly turn the thermostat knob anticlockwise until the heat-
ing light goes out.
The thermostat will then keep the temperature in the room at the 

Dehumidifying
standby light 

Humidistat
knob

Function
selector

Tank full/
tank missing

5748010000  6-08-2003  18:02  Pagina 5