Toshiba Digital Recording and Transmission System Manual Do Utilizador
Embedded DVR User Guide
________________________________________________________________________________________________________
25
System Configuration Continued
Use DST – After completing the Time Zone setup, highlight USE DST and press Enter to turn Daylight Saving Time ON /
OFF.
NTP Type – Highlight NTP (Network Time Protocol) and press Enter to SYNC the DVR with the Network Time.
Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch confirmation].
Auto Log Off – OFF or 1-10 Minutes [This feature will close the Configuration Menu after XX minutes of inactivity. This is a
NTP Type – Highlight NTP (Network Time Protocol) and press Enter to SYNC the DVR with the Network Time.
Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch confirmation].
Auto Log Off – OFF or 1-10 Minutes [This feature will close the Configuration Menu after XX minutes of inactivity. This is a
security feature.]
S/W Upgrade – Start firmware upgrade from selected media (USB)
S/W Upgrade – Start firmware upgrade from selected media (USB)
Upgrade Firmware
1. Press SETUP on the front panel or remote control.
or
Click TOOL on the hover menu and select SETUP.
2. Select SYSTEM > SYSTEM CONFIGURATION.
3. Click S/W UPGRADE to open the UPGRADE FIRMWARE window.
4. Insert the USB device.
5. Select the media type (USB HDD/STICK).
6. Click SCAN.
7. Click OK to start the upgrade.
3. Click S/W UPGRADE to open the UPGRADE FIRMWARE window.
4. Insert the USB device.
5. Select the media type (USB HDD/STICK).
6. Click SCAN.
7. Click OK to start the upgrade.