Emerson IM-106-5500 Manual Do Utilizador
Instruction Manual
IM-106-5500, Original Issue
August 2005
CCO 5500
4-2
MODES OF OPERATION
The instrument has six modes of operation identified by a number in the top
left corner of the display:
left corner of the display:
Mode 1 - Operating Mode
Displays average gas concentration.
Displays average gas concentration.
Mode 2 - Parameter Mode
Displays operating parameters.
Displays operating parameters.
Mode 3 - Normalization Mode
Displays normalization data.
Displays normalization data.
Mode 4 - Diagnostic Mode
Investigates instrument operation. Self checks are continually made by the
instrument; should a complication exist, this mode will automatically be
selected and the fault displayed on the display.
Investigates instrument operation. Self checks are continually made by the
instrument; should a complication exist, this mode will automatically be
selected and the fault displayed on the display.
Mode 5 - Setup Mode
Sets operating parameters. The opening parameters must be entered for
the instrument to function correctly. This mode can only be accessed using
a security code.
Sets operating parameters. The opening parameters must be entered for
the instrument to function correctly. This mode can only be accessed using
a security code.
Mode 6 - Check Cell Mode
Used to verify the instruments’ operation and calibration.
Used to verify the instruments’ operation and calibration.
NOTE
The outputs of the instrument are unaffected by key operation in all modes
except the setup mode.
The outputs of the instrument are unaffected by key operation in all modes
except the setup mode.
Figure 4-1. Keypad
Mode
Enter
32 Character
Liquid Crystal Display
Liquid Crystal Display
Key Panel
Data Valid and
Alarm LEDs
Alarm LEDs
Alarm
Data Valid