Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Regency
  4. P121
  5. Manual Do Utilizador

Regency P121 Manual Do Utilizador

Download
Página de 48
Regency
®
 P121-2/P121LC-2/P121RC-2/P131-2 Zero Clearance Direct Vent Gas Fireplace
17
Option    
V 
 
 
H
     A) 
1' (305mm) Minimum 
3' (914mm) Maximum
     B) 
2' (610mm) Minimum 
6' (1.86m) Maximum
     C) 
3' (914mm) Minimum 
9' (2.7m) Maximum
     D) 
4' (1.22m) Minimum 
12' (3.6m) Maximum
     E) 
5' (1.5m) Minimum 
15' (4.5m) Maximum
     F) 
6' (1.86m) Minimum 
17' (5.1m) Maximum
With the above options, maximum total pipe length if 37 feet 
with minimum of 6 feet total vertical and maximum 17 feet total 
horizontal.
Please note minimum 1 foot between 90
o
 elbows is required.
INSTALLATION
RIGID PIPE VENTING ARRANGEMENTS
HORIZONTAL TERMINATIONS
REGENCY DIRECT VENT SYSTEM (FLEX)  (Propane & Natural Gas)
The diagram below shows examples of horizontal termination arrangements using one, two, or three 90
o
 elbows (two  45
o 
elbows equal one 90
o
 
elbow).
Note: 
1)  A maximum of three 90
o
 elbows are permitted. 
2)  Minimum distance between elbows is 1 ft. (305mm).
•   Maintain clearances to combustibles as listed in the "Clearances" section.
•   Horizontal vent must be supported every 3 feet.
•   Firestops are required at each fl oor level and whenever passing through a wall.
•   Must use optional rigid pipe adaptor (Part# 510-994) when using rigid pipe vent systems.
•   A vent guard should be used whenever the termination is lower than the specifi ed minimum or as per local codes.
Straight Out Horizontal Venting
Horizontal Venting with One (1) 90
o
 Elbow
Diagram 1
Diagram 2
Please note the minimum centerline for 
basic install shown above.
All Rigid Pipe Systems
4" inner diameter
6-5/8" outer diameter