Majestic Appliances 3374 Manual Do Utilizador

21

Vermont Castings Radiance Vent-Free Gas Heater

20004555

The combustor should be cleaned annually to ensure
optimal performance. Follow the procedure below.

1. Be sure the heater is COLD.

2. Remove the front plate, top grille and screen. (Fig. 36)

3. Use the phillips screwdriver to remove the two sheet

metal screws that secure the combustor to the top of
the firebox. (Fig. 37) Use a flat screwdrive to lift the
unit up and  out through the front of the stove.

1. Clean the outer surface of the filter with the brush

attachment of your vacuum sweeper to remove
loose dirt.

2. Submerge the filter in a mild soapy water solution.

Rinse thoroughly with 

3. Replace in heater when dry.

1. Slide the combustor through the front opening of the

stove and insert it into the housing on top of the
firebox. Secure with the two sheet metal screws.

2. Replace the glass panel and front.

ST139

Fig. 36  Remove the front plate and top grille/screen.

ST201

Fig. 37  Remove the catalytic combustor module.