Sanyo KHX1852 Manual Do Utilizador

2-31

•  This allows the filter lifetime, operating mode prior-

ity change, central control address, and other set-
tings to be made for an individual or group-control 
indoor unit to which the remote controller used for 
simple settings is connected.

  When this function is engaged, operation stops at 

the individual or group-control indoor unit to which 
the remote controller for simple settings is con-
nected.

 Press and hold the 

 and 

 buttons 

simultaneously for 4 seconds or longer.

 “

,” unit No. “

” (or “

” in the case of 

group control), item code “

,” and settings data 

“

” are displayed blinking on the remote 

controller LCD display. At this time, the indoor unit 

fan (or all indoor unit fans in the case of group 

control) begins operating.

 If group control is in effect, press the 

 

button and select the address (unit No.) of the 

indoor unit to set. At this time, the fan at the 

indoor unit begins operating.

 * 

 

If unit No. “

” is displayed, the same setting 

will be made for all indoor units.

 Press the temperature setting 

 / 

 

buttons to select the item code to change.

 Press the timer time 

 / 

 buttons to select 

the desired setting data.

 * 

 

For item codes and setting data, refer to the 

following page.

 Press  the 

 button. 

(The display stops blinking and remains lit, and 

setting is completed.)

 Press  the 

 button to return to normal remote 

controller display.

7

3

1

6

5

4

2

SM830157_W-2WAY_ECO-i.indb   31

SM830157_W-2WAY_ECO-i.indb   31

2007/06/08   14:23:33

2007/06/08   14:23:33