Lg Electronics PACKAGED TERMINAL AIR CONDITIONER/HEAT PUMP Manual Do Utilizador
Electrical Safety
Owner’s Manual 9
ENGLISH
Electrical Safety
Electrical Data
115V~
230V~
265V~
Power cord may include a current
interrupter device. A test and reset button
is provided on the plug case. The device
should be tested on a periodic basis by
first pressing the TEST button and then
the RESET button. If the TEST button
does not trip or if the RESET button will
not stay engaged, discontinue use of the
air conditioner and contact a qualified
service technician.
interrupter device. A test and reset button
is provided on the plug case. The device
should be tested on a periodic basis by
first pressing the TEST button and then
the RESET button. If the TEST button
does not trip or if the RESET button will
not stay engaged, discontinue use of the
air conditioner and contact a qualified
service technician.
Use Wall Receptacle
Power Supply
Standard 208/230V, 3-wire
grounding receptacle rated 15A
grounding receptacle rated 15A
Standard 208/230V, 3-wire
grounding receptacle rated 20A
grounding receptacle rated 20A
Use 15 AMP. time
delay fuse or 15 AMP.
Circuit breaker.
delay fuse or 15 AMP.
Circuit breaker.
Use 20 AMP. time
delay fuse or 20 AMP.
Circuit breaker.
delay fuse or 20 AMP.
Circuit breaker.
Use 30 AMP. time
delay fuse or 30 AMP.
Circuit breaker.
delay fuse or 30 AMP.
Circuit breaker.
Standard 208/230V, 3-wire
grounding receptacle rated 30A
grounding receptacle rated 30A
Never push the test button during
operation
Otherwise this plug can damaged.
This device contains chemicals, including
lead, known to the State of California to
cause cancer, birth defects, or other
reproductive harm.
Wash hands after handling.
Do not remove, modify, or immerse this plug.
If this device trips, the cause should be
corrected before further use.
operation
Otherwise this plug can damaged.
This device contains chemicals, including
lead, known to the State of California to
cause cancer, birth defects, or other
reproductive harm.
Wash hands after handling.
Do not remove, modify, or immerse this plug.
If this device trips, the cause should be
corrected before further use.
The conductors inside this cord are
surrounded by shields, which monitor
leakage current.
These shields are not grounded.
Periodically examine the cord for any
damage. Do not use this product in the
event the shields become exposed.
Avoid shock hazard! This unit cannot
be serviced. Opening the tamper-
resistant, sealed portion of the unit
voids all warranties and performance
claims. This unit is not intended to be
an ON/OFF switch.
surrounded by shields, which monitor
leakage current.
These shields are not grounded.
Periodically examine the cord for any
damage. Do not use this product in the
event the shields become exposed.
Avoid shock hazard! This unit cannot
be serviced. Opening the tamper-
resistant, sealed portion of the unit
voids all warranties and performance
claims. This unit is not intended to be
an ON/OFF switch.
The shape may be different according to its model.
NOTICE
DO NOT USE AN EXTENSION CORD on 230,
208, and 230/208 Volt units.
All wiring should be made in accordance with local
electrical codes and regulations.
Aluminum house wiring may pose special
problems. Consult a qualified electrician.
208, and 230/208 Volt units.
All wiring should be made in accordance with local
electrical codes and regulations.
Aluminum house wiring may pose special
problems. Consult a qualified electrician.
NOTICE