EdgeStar AP12005ECO Manual Do Utilizador

EdgeStar Portable Air Conditioner  

 

14 

 

 

The timer can be used to either turn the unit on or off after a number of 
elapsed hours. The timer is adjustable between 1-24 hours in one hour 
increments. 
 
How to set the unit to automatically turn on

: 

1) Press the 

 Timer button while the unit and remote are powered 

off. The On Timer [

] indicator will be selected and the timed hour 

indicator will be blinking. 
2) Use the 

 Up and 

 Down buttons to set the number of hours 

you want to pass before the unit turns on.  
3) Press the 

 Timer button again to set the timer. The timed hour 

indicator will stop blinking. After the selected time passes, the unit will 
automatically turn on. 
 
How to set the unit to automatically turn off

: 

1) Press the 

 Timer button while the unit and remote are powered 

on. The Off Timer [

] indicator will be selected and the timed hour 

indicator will be blinking. 
2) Use the 

 Up and 

 Down buttons to set the number of hours.  

3) Press the 

 Timer button again to set the timer. The timed hour 

indicator will stop blinking. The unit will automatically turn off after the 
selected time elapses. 

 

 
Your portable air conditioner has a front panel that lights up different 
colors depending on the mode it is running.  
 
Cooling mode will display a blue light. 
Dehumidify mode will display a yellow light. 
Fan mode will display a green light. 
Heating mode (on some models) will display a red light. 
Automatic mode will display the color of the current mode.  
 
If the unit flashes a red light and the unit stops cooling, this indicates that 
the internal water reservoir is full. Place a pan under the unit, and remove 
the drain plug to drain the unit.  
 
If the lights flash from left to right and the unit does not work, contact 
customer service.  
 

The front panel has an emergency power switch. The power switch 
can be used when the unit needs to be shut off or turned on without 

the remote control.  
 

 You can turn off the front panel lights by hitting the Lamp Off switch.  

 

NOTE: To cancel the timer, 
press 

 Power button or 

set it at “00”.