EdgeStar AP10000HW Manual Do Utilizador

12

 

 

 

 

 FIG.14

 

 
 
Move the roller on the air vent to the 
left or right to control the air flow 
direction. 
 
 

 

  NOTICE ! 
1. 

To prolong the compressor's life, please wait at least 3 minutes before turning the 
unit back on after shutting it off.  

2. 

The cooling system will shut off if the ambient temperature is lower than the set one. 
The fan, however, keeps working on the set level. If the ambient temperature rises 
above the selected level, the cooling system will return to operation.

 

All the control panel functions can also 
be set with the remote control. 
 

1.  LED Indicator – Lights up when 

you press any of the buttons. 

2.  Power Button – Used to power the 

unit on or off 

3.  Mode Button – Used to change 

between auto, cooling, heating, or 
fan modes. 

4.  Timer Button – Used to set the 

timer function.  

5.  Up Button – Used to increase the 

temperature. 

6.  Down Button – Used to decrease 

the temperature. 

7.  Fan Speed Button – Used to set 

the fan speed. 

1 
 
2 
 
3 
 
4 

5 
 
 
6 
 
7 

Note: The 
remote uses 
two AAA 
batteries. 

 

    higher than the set one(still, the ventilation keeps working on the set level).

     As the ambient temperature drops below the selected level, the heating will

    order to melt the frost. As this occurs, just wait for the heating returns to work.

     function during low temperature, sometimes the heating will stop for a while in

     return to work.

3.  On the contrary, the heating will swith off if the ambient temperature is 

4. This machine is equipped with ANTI-FROST function. While using the heating