Friedrich WE16 Manual Do Utilizador

6

920-007-12

To set the timer

NOTE: You can set the START and STOP times a minimum of one 
hour apart, and a maximum of 23 hours apart.

9  TIMER START - Press Start to view the current start time for 

cooling. Continue pressing the START button until you arrive at 
the start time you desire. The start time for cooling will then be 
set.

10  TIMER STOP - Press the Stop button. Continue pressing the 

STOP button until you arrive at the stop time you desire.  The 
stop time for cooling will then be set.

11  TIMER ON / OFF - Press the On/Off button (under Timer 

Operation) to activate (light on) or deactivate (light off) the timer.  
Once the on and off times have been selected, they will remain 
in memory and cycle daily until changed.

NOTE: If the unit is unplugged or the power is interrupted, the Set Hr. 
function must be reset or the Timer On/Off function will not work.

How to use the remote control

To start unit

1  POWER - Press the Power button once. The unit will automatically 

start in the mode and fan speed it was last left on.

To set mode of operation

2   COOL - Press the Cool button to automatically switch the operat-

ing mode to COOL.

3  FAN ONLY - Press the Fan Only button if you want to run the 

fan only. 

4  MoneySaver

 - Press the Money Saver

 button to activate 

the MoneySaver

®

 feature. This feature cycles the fan with the 

compressor so that the fan does not run all the time.

To adjust temperature

5  WARMER - Press the    Warmer  button to raise the temperature 

setting.

6  COOLER -  Press the    Cooler  button to lower the temperature 

setting.

To adjust fan speed

7  FAN SPEED - Press the Fan Speed button to see the current 

setting.  Press again to change the fan speed.  F1 is the lowest 
setting (SLEEP / LOW), F2 is MEDIUM, F3 is HIGH, and SF is 
the SMART FAN setting.

To set the hour clock

8  SET HOUR CLOCK -  Press the Set Hr. button once to see the 

current clock setting.  Continue pressing the button until you 
arrive at the current time (Hour only).  Minutes are not shown on 
the display.  Make sure that the A.M. / P.M. setting is correct.

 Start

8

10

7

11

9

4

3

1

2

5

6

Additional RC1 wireless remote controls can be 
purchased from your Friedrich dealer.