Thermo Products 30 Manual Do Utilizador

All installations and services must be performed by qualified service personnel. 
 
 

: For initial start-up of the appliance after installation, it may be necessary to 

purge the air out of the oil line. A qualified heating contractor should do this.  
 

: If you do not follow these instructions exactly, a fire or explosion may 

result causing property damage, personal injury or loss of life. 
 
 

:  Do not run the oil pump dry for more than five minutes, as irreparable 

damage may result. 
 

:  Before troubleshooting, familiarize yourself with the start up and check out 

procedures. 
 

:  Never burn garbage or refuse in this appliance. Never try to ignite oil by 

tossing burning papers or other material into the combustion chamber. 
 

: Oil-fired appliances produced by Thermo Products are designed for burning 

No. 2 distillate (domestic heating) fuel oil. Never use gasoline or a mixture of oil and 
gasoline. 
 
I

: Do not attempt to make repairs yourself. Contact your local qualified heating 

contractor. 
 

: This appliance is designed to directly vent combustion products into 

the atmosphere through, and using only, the supplied vent terminal. Do not 
attempt to attach a vent connector or a vent system to, or in place of, the supplied 
vent terminal.  
 

°F or cooler. 

 
 

7