Lochinvar 000 Manual Do Utilizador

Installation and service must be per formed by a qual i fied service
in stall er, service agency or the gas supplier.

Factory warranty (shipped with unit) does not apply to units
improperly installed or improperly operated.

Experience has shown that improper installation or system design,
rather than faulty equipment, is the cause of most operating
problems.

1. 

 

Excessive water hardness causing a lime/scale
build-up in the copper tube is not the fault of the 
equipment and is not covered under the 
manufacturer’s war 

ran 

ty. (See Water Treatment and   

Water Chemistry)

2. 

 

 Excessive pitting and erosion on the inside of the 

copper tube may be caused by too much water 
velocity through the tubes and is not covered by 
the man 

u 

fac 

tur 

er’s warranty (See Boiler Flow Rates 

and Temperature Rise for flow requirements).

This manual supplies information for the installation, operation
and ser vic ing of the appliance.  It is strong ly recommended that
this manual be re viewed com plete ly before proceeding with an
installation.



IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE can
cause injury or property damage.  Refer to this manual.  For
assistance or additional information, consult a qualified
installer, service agency or the gas supplier.