Hughes AN4-074-DF Manual Do Utilizador
Chapter 2 • Antenna parts and required tools
8
1035567-0001 Revision A
Trimast (or other antenna
mount)
The trimast is not part of the antenna kit. It is shown here because
it is the most commonly used mounting option for the .74 m
antenna. As shown in Figure 6, the trimast can be configured and
manipulated in several ways to adapt it for mounting onto
surfaces of various angles. For other suitable mounting options,
see the DIRECWAY Antenna Site Preparation and Mount
Installation Guide (HNS 1035678-0001).
it is the most commonly used mounting option for the .74 m
antenna. As shown in Figure 6, the trimast can be configured and
manipulated in several ways to adapt it for mounting onto
surfaces of various angles. For other suitable mounting options,
see the DIRECWAY Antenna Site Preparation and Mount
Installation Guide (HNS 1035678-0001).
Optional shroud
The shroud shown in Figure 4 is optional. It attaches to the feed
assembly to protect the feed assembly and improve its
appearance, but it is not required.
assembly to protect the feed assembly and improve its
appearance, but it is not required.
Figure 6: Trimast in various configurations
Wall
Flat roof
Pitched roof
Mast
Struts (2)
T0145002
Figure 7: Optional shroud for feed assembly