Hughes AN4-074-DF Manual Do Utilizador

 

After pointing, make sure the required safety labels and/or signs 
are present:

• Make sure a Radiation Hazard Caution label is present, 

legible, and visible on the feed arm.

• If the antenna is enclosed by a fence, make sure a Radiation 

Hazard Caution sign is present, legible, and visible on the 
entrance gate.

• If the antenna is installed on a roof with a permanently 

mounted access ladder, make sure a Radiation Hazard 
Caution sign is present, legible, and visible on or near the 
ladder.

Be sure to remove the fine elevation pointing tool so you can use 
it for subsequent installations.

1. Remove the pointing tool’s upper and lower brackets from the 

elevation bracket and canister.

2. Replace the nuts and bolts in the pointing tool’s tool brackets 

so they will not get lost.

The antenna is now installed and pointed, ready for operation.

Refer to the IDU installation manual for information on how to 
register and configure the site.