Midland Radio CB-1 Manual Do Utilizador

1� Easy removal mounting bracket system�

2� Microphone bracket system�

3� All main-unit and microphone mounting hardware needed for normal installation�

4� Plug-in microphone with coil cord�

5� FCC part 95, Subpart D�

6� Owner’s Manual�

Your new Midland CB is designed to be installed under the dash or vertically on a 

console of your vehicle� Safety and convenience are the primary considerations in 

deciding exactly where to locate your radio�

Caution: Be sure that the unit is located so that it does not interfere with the driver, 

supplemental restraint systems (air bags) or impair access to any controls� Connecting 

cables must be routed and secured in such a manner as not to interfere with the 

operation of the brake, accelerator or other controls� Interference from either the unit or 

connecting cables may contribute to the loss of control of the vehicle�

1� Heeding the caution, use the mounting bracket as a template for marking the 

location of screw holes under the dash� Use an awl, nail or other sharp pointed 

object to mark the hole locations�

2� Drill a 1/8” hole for each screw hole in the mounting bracket� Attach the bracket to 

the dash with the Phillips head sheet metal screws provided�

Extreme care should be exercised when drilling into the dash to avoid 

damage to under-dash electronic ignition, cruise control, instrument and / 

or accessory wiring�

3� Position the main unit between the bracket arms in line with the retention knobs� Set 

the angle for optimum operating, comfort and accessibility�

4� Tighten the retention knobs�