Radio Shack 12-1686 Manual Do Utilizador
10
11
The Basics
Setting the Clock
To set your radio’s clock, complete the following steps:
1. Turn on your radio.
2. Press and hold the CLOCK
2. Press and hold the CLOCK
button until the time display
appears with the hour blinking.
appears with the hour blinking.
3. Use the TUN - / + buttons to set
the hour and press the CLOCK
button. The minutes value starts
blinking.
button. The minutes value starts
blinking.
4. Repeat step 3 for the minutes, AM/PM, date, month, and year. After you
set the year, the radio display returns to normal with the updated date
and time information.
and time information.
Saving Preset Stations
To save a frequency in your radio’s memory, complete the
following steps:
following steps:
1. Press MODE to select the band (AM1, AM2, FM1,
FM2) .
2. Select the frequency.
3. Press PRESET STORE.
4. Use the CH- /+ buttons on the radio or use the
3. Press PRESET STORE.
4. Use the CH- /+ buttons on the radio or use the
number buttons on the remote control to select
a preset station number.
a preset station number.
5. Press PRESET STORE. to save the preset station. If
you don’t press PRESET STORE again within a few
seconds, the radio returns to normal mode without
saving the frequency in memory.
seconds, the radio returns to normal mode without
saving the frequency in memory.
Note: Your radio provides six preset positions for each band (AM1, AM2, FM1,
Preset station
number
number
Currently saved
frequency
frequency