Tyco Electronics M7200 Manual Do Utilizador

The radio can store up to sixteen (16) standard profiles, one of which is the currently active profile. To 
change the currently active profile: 

1.  Press up or down using 

 until “ProfileMenu” is displayed. 

2.  Use 

 to scroll through the list of available profiles. 

3.  Profile becomes active when selected for longer than 2 seconds, when the 

 is pressed, or when 

the menu is changed using 

.  

Each profile stored in the radio can have up to sixteen (16) talk groups. One talk group within the 
currently active profile is set as the “selected talk group.” For the radio user, the selected talk group is 
typically the focus of most voice transmissions and receptions. There are two ways to change the selected 
talk group: 

1. 

U

se 

 to scroll through the menu until “TalkGrpMenu” appears on the bottom line of the 

display. The currently selected talk group appears in the top line of the display.  

2.  Use 

 to scroll through the available list of talk groups in the active profile. This list is 

determined by the OpenSky network administrator. 

From the dwell display, use the talk group selection knob or 

 to scroll through the available list of 

talk groups in the active profile. 

The radio uses a light sensor on the front panel to automatically adjust display brightness and button 
backlight brightness to ambient light conditions. The display and backlights automatically brighten at 
higher external light levels and automatically dim at lower external light levels. However, the “Bright 
Menu” gives the user some manual brightness control as follows: 

1.  Using 

, scroll through the menu until “Bright Menu” appears. 

2.  Use 

 to increase or decrease brightness. Display and button backlight brightness will 

immediately dim or brighten. 

For some users, it is important to be able to turn off the radio’s display lights, button backlighting, volume 
and side tones, but not the radio traffic. For example, in covert operations, lights and sounds could 
inadvertently expose an otherwise unobservable radio user. For this purpose, the radio has a Stealth 
feature that disables the radio display light, indicator light and audible side tones.  

When stealth mode is on, the radio continues to scan the programmed list of talk groups and the user can 
key-up on the selected talk group. 

24