Hans Grohe 38117XX1 Instrução De Montagem

3

Remove the covers from the plaster shields (1).

Trim the plaster shields so that they extend 1/16” out-

side the surface of the finished wall ().  Seal the wall 

around the plaster shield with waterproof sealant. 

Use a 17 mm socket wrench to remove the spout plug.

Use a 7 mm socket wrench to remove the cartridge 

assembly.  Remove and discard the cup washers and 

springs.

Remove and discard the cartridge and anti-twist 

device from the housing.  Install the new cartridge and 

anti-twist device in the housing.