Honeywell MS-9200UDLS Manual Do Utilizador

Programming

116

MS-9200UDLS   PN 52750:A    11/04/05

The factory set passwords, which have been programmed into the control panel, can be 
changed by selecting the Password Change option.  Pressing 1 while viewing 
Programming Screen #4 will cause the following screen to be displayed:

Press 1 to change the Master Programming Level password or 2 to change the 
Maintenance Level password.  Note that the passwords will not be displayed on 
LCD-80F annunciators.

The following screen will appear when either change option is selected:

A flashing cursor will appear in the center of the display.  Enter a new five digit 
password (such as 10101 for the Master Level).  After the fifth digit is entered, the 
following screen will be displayed:

Pressing the Enter key will program the new password into the control panel and return 
the display to the Password Change Screen.

    PROGRAMMING
1=PASSWORD CHANGE
2=CLEAR PROGRAM
3=PROGRAM CHECK

Programming Screen #4

  PASSWORD CHANGE
1=MASTER
2=MAINTENANCE

ENTER NEW FIVE DIGIT
      PASSWORD
        

  NEW MASTER
PASSWORD IS    10101
PRESS ENTER IF OK