Honeywell MS-9200UDLSE Manual Do Utilizador
Programming
Maintenance Programming Level
120
MS-9200UDLS PN 52750:A 11/04/05
3.7 Maintenance Programming Level
To access Maintenance Programming mode, press the Enter key. The LCD will display
the following:
the following:
To enter the Maintenance Programming mode, press 2. The display will read as
follows:
follows:
When the Maintenance level password (default 11111) is entered, the following screen
will appear:
will appear:
Note that in the preceding screens, an arrow appears to inform the programmer that
additional options can be viewed by pressing the keypad down arrow key, as shown in
the following screen.
additional options can be viewed by pressing the keypad down arrow key, as shown in
the following screen.
1=READ STATUS
2=PROGRAMMING
2=PROGRAMMING
PROGRAMMING
ENTER PASSWORD
ENTER PASSWORD
PROGRAMMING
1=POINT PROGRAM
2=HISTORY
3=PROGRAM CHECK
1=POINT PROGRAM
2=HISTORY
3=PROGRAM CHECK
PROGRAMMING
1=WALKTEST
2=SYSTEM
3=ZONE SETUP
1=WALKTEST
2=SYSTEM
3=ZONE SETUP