Honeywell MS-9200UDLSE Manual Do Utilizador

Remote Site Upload/Download

162

MS-9200UDLS   PN 52750:A    11/04/05

Items that may be uploaded from the control panel to a Service Terminal are:

• All programmed data plus the real-time clock, time and date
• Entire Walktest data file
• Troubleshoot Mode system voltages
• Entire event History file
• Current system status

Uploading is possible at any time provided the following conditions are true:

The control panel must be in the Normal Mode of operation.  Uploading is not 
possible if the panel is in any other mode
There cannot be any active communications ongoing with a Central Station 
receiver
All active events must be successfully 'kissed-off' by the Central Station (the 
communicator must be in a standby state with no new information waiting to 
be transmitted to a Central Station)

Once an incoming call is accepted/answered by the control panel, the panel will:

1. Establish basic modem connection

2. Verify secret code and panel identification number

3. Verify callback vs. no callback request from the service terminal.  If callback is 

requested, steps 4 through 9 will occur.  If no callback is requested, only steps 8 
and 9 will occur

4. Identify the Service Terminal location

5. Hang-up/disconnect call

6. Call the Central Station(s) and transmit a request for upload/download message 

(if programmed to do so).  If this message is accepted, the control panel will 
proceed to the next step

7. Return call to Service Terminal

8. After security clearance, begin uploading

9. Upon completion of upload, call Central Station(s) back and report either a 

successful upload or failed upload/download message (if programmed to do so).