Honeywell MS-9200UDLSE Manual Do Utilizador
Product Description
Optional Modules
20
MS-9200UDLS PN 52750:A 11/04/05
1.7 Optional Modules
The MS-9200UDLS main circuit board includes option module connectors for the
following module:
following module:
4XTMF Transmitter Module
The 4XTMF provides a supervised output for local energy municipal box transmitter,
alarm and trouble reverse polarity. It includes a disable switch and disable trouble
LED. A jumper on the module is used to select an option which allows the reverse
polarity circuit to open with a system trouble condition if no alarm condition exists.
The module plugs into connectors J5 and J6 which are located near the right edge the
main circuit board. When the 4XTMF module is installed, Jumper JP3, on the main
circuit board, must be cut to allow supervision of the module.
alarm and trouble reverse polarity. It includes a disable switch and disable trouble
LED. A jumper on the module is used to select an option which allows the reverse
polarity circuit to open with a system trouble condition if no alarm condition exists.
The module plugs into connectors J5 and J6 which are located near the right edge the
main circuit board. When the 4XTMF module is installed, Jumper JP3, on the main
circuit board, must be cut to allow supervision of the module.
1.8 Accessories
1.8.1 PK-CD Programming Utility
The PK-CD Programming Utility can be used to program an MS-9200UDLS directly
from most IBM compatible computers, including laptops and portables, equipped with
a serial port. MS-9200UDLS program files can also be created and stored on the PC
and then downloaded to the control panel. The PK-CD Kit includes the MS-
9200UDLS Windows-based Programming Utility software on CD-ROM with on-line
help file. A serial cable (P/N: PRT/PK-CABLE), which must be purchased separately,
is required for connection of the PC to the RS-232 (PC/Printer) terminals at TB8 of the
MS-9200UDLS main circuit board. Refer to the illustration on page 10 and the section
titled "Printer/PC" on page 40, for the location and connections to this terminal.
from most IBM compatible computers, including laptops and portables, equipped with
a serial port. MS-9200UDLS program files can also be created and stored on the PC
and then downloaded to the control panel. The PK-CD Kit includes the MS-
9200UDLS Windows-based Programming Utility software on CD-ROM with on-line
help file. A serial cable (P/N: PRT/PK-CABLE), which must be purchased separately,
is required for connection of the PC to the RS-232 (PC/Printer) terminals at TB8 of the
MS-9200UDLS main circuit board. Refer to the illustration on page 10 and the section
titled "Printer/PC" on page 40, for the location and connections to this terminal.
1.8.2 Dress Panel
An optional dress panel DP-9692 is available for the MS-9200UDLS (required by ULC
for Canadian installations). The dress panel restricts access to the system wiring while
allowing access to the key panel. A ground strap must be connected between the stud
on the inside of the dress panel and the ground stud in the backbox. The dress panel
must be installed to meet FM requirements.
for Canadian installations). The dress panel restricts access to the system wiring while
allowing access to the key panel. A ground strap must be connected between the stud
on the inside of the dress panel and the ground stud in the backbox. The dress panel
must be installed to meet FM requirements.
dp9200udls.cdr