Honeywell MS-9200UDLSE Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

57

Pressing 3 or 4 while viewing the Noun/Adjective Screen will display screens 
similar to the previous Adjective and Noun Screens.  The new screens will list 
custom Adjectives and Nouns which have been programmed into the control panel 
using the PK-CD programming kit.  These descriptors are selected as described in 
the previous sections.

The Description selection allows the programmer to enter additional information 
about the detector currently being programmed.  This information will be displayed 
as part of the device label on the display.  Pressing 2 while viewing Edit Detector 
Screen #5 will cause the following screen to be displayed: 

A flashing cursor will appear at the first asterisk to the left.  The programmer can 
enter additional descriptive information about the device being programmed.  This 
information will appear on the display along with the standard device label 
information.  

A maximum of 20 characters (including spaces) can be entered.  To enter 
alphanumeric characters from the keypad, repeatedly press the appropriate key until 
the desired character is displayed in the first position.  For example, to enter the 
letter B, press the 2 (ABC) key three times to toggle through the characters 2, A and 
B.  Press the right arrow key to move the cursor one position to the right and repeat 
the process to enter the next character.  To enter a space, press the * (QZ) key four 
times until a blank appears in the desired position.  When all characters have been 
entered, press the Enter key to store the information.  The display will return to the 
Edit Detector Screen #5, displaying the new information at the bottom of the screen.

Recall/Increment Function
In addition, the user may use the Recall/Increment function at any time when the 
cursor is on the first letter of the Description, Adjective or Noun field as follows:

• If the zero key is pressed, a 0 is placed in the first letter position
• If the zero key is then pressed a second time with no intervening key actions, the 

entire field is replaced with the field entered for the previous device programmed, 
and the cursor moves to the last character of the field (Recall function).  The 
Recalled Adjective or Noun field may now be changed letter-by-letter

• If the zero key is pressed again with no other intervening key actions and the last 

character in the field is a number 0-9, the number is incremented by one.  If the 
last character is a letter, it changes to a 0.  If the last character goes from 9 to 0 
and the characters to the left of the last character are also numbers, they are also 
incremented (overflow)

• The above increment function may be repeated with each press of the zero key

1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN

Noun/Adjective Screen

EDIT DETECTOR
1=NOUN/ADJECTIVE
2=DESCRIPTION

Edit Detector Screen #5

DESCRIPTION    1D002
1=NOUN/ADJECTIVE

********************