Honeywell MS-9600LSE Manual Do Utilizador

102

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

Programming

Pressing 1 while viewing the Banner Screen will select the blank factory default banner setting and 
display the following screen:

Pressing the Enter key will store this selection in nonvolatile memory and return the display to the 
Banner Screen.

Pressing 2 while viewing the Banner Screen will display the following screens : 

These screens allow the programmer to enter a two line custom banner.  A flashing cursor will 
appear in the bottom left corner of each display.  A maximum of 20 characters (including spaces) 
can be entered into each screen for a total of two lines with 40 characters.  After entering up to 20 
characters in the first screen, press Enter to view the second screen.  Enter up to 20 characters in the 
second screen in the same manner or just press Enter if a second banner line is not being entered.  
To quickly clear the current banner, press the CLR key.

To enter alphanumeric characters from the keypad, repeatedly press the appropriate key until the 
desired character is displayed in the first position.  For example, to enter the letter B, press the 2 
(ABC) key three times to toggle through the characters 1, A, and B.  Press the right arrow key to 
move the cursor one position to the right and repeat the process to enter the next character.  To enter 
a space, press the * (QZ) key four times to place a blank in the desired position.  When all charac-
ters have been entered, press Enter to store the information and return to the Banner Screen.

    BANNER

1=FACTORY

2=USER DEFINED

Banner Screen

   FACTORY BANNER

      

USER DEFINED BANNER

PRESS ENTER IF OK

USER BANNER - LINE 2

PRESS ENTER IF OK

************