Cooper Lighting 200ERV Folheto
DESCRIPTION
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
Protector
7.45”
4.65”
12.01”
6.15”
4.65”
16.14”
15.01”
6.14”
45º x 45º
Adjust
Double
Gimbal
Gimbal
Integral Electronic
Low Voltage Transformers
A ... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con-
ductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling
not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic or magnetic
low voltage transformers on individually
removable “trays” for easy maintenance.
May also be configured for remote power.
E ... Lamps
One (1) 12V AR70 lamp mounted in adjust-
able double gimbal. Lamp holder is indi-
vidually removable and may be regressed
1” for additional cut-off. Lamp can accept
up to three optical accessories (i.e. lens +
hex louver + snoot). 45º x 45º locking lamp
adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Optional retractable arm is available
for lamp pulldown and extreme aiming.
Double contact bayonet base sockets
included.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.44” x 5.44”
COMBOLIGHT
®
Next Generation
Recessed
Single-Lamp Fixture
One (1) Light
12V AR70
New Construction
Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Single-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes ONE (1) 12V AR70 lamp.
downlighting and accent applications. Utilizes ONE (1) 12V AR70 lamp.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 022408
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
De-Rated wattage labels are available.
12V Primary voltage is available.
Configuration
C1
C1
=
COMBOLIGHT
Recessed One (1) Light
Housing
N
N
=
New Construction
C
=
Chicago Plenum
C1
T
Lamp Type / Wattage Label
050A70
050A70
=
50 Watt max. AR70 12V
Power Supply
E
E
=
Electronic Low Voltage
Transformer
M
=
Magnetic Low Voltage
Transformer
Power Supply
Voltage
1
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Finish
W
W
=
White
B
=
Black
S
=
Industrial Silver
Trim Flange
T
T
=
0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
Finish
W
=
White
B
=
Black
S
=
Industrial Silver