Cooper Lighting 195DCS Folheto

www.cooperlighting.com

Perforated 
Meshplate

Thermal
Protector

Integral Low Voltage Transformers

Separate Wiring Compartment

18” flexible conduit

3.88”

23.25”

24.08”

29.61”

26.05”

6.25”

8.50”

3.88”

1.60”

6.50”

20.15” 

5.75” 

Required 

above 

ceiling

10.24”

45º x 45º

Adjust

Double 
Gimbal

Housing and junction box are aluminum,  

trimless meshplate is steel with powder 

coated finish.  Perforated meshplate 

allows for trimless installation in drywall/

plaster ceilings by allowing the ceiling’s 

mudding compound to be applied right 

up to the edge of the fixture opening.  

Includes a beveled “knife-edge” lips to 

ensure a clean edge. Can accommodate 

various ceiling thickness. 

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through branch 

wiring, 6 #12 90º C supply conductors or 

60º C for end of run. The fixture is also UL 

listed as ‘access above ceiling not required’. 

Integral electronic or magnetic low voltage 

transformers. Transformers and electrical 

are mounted in a separate metal enclosure 

box attached to the junction box with 18” 

of flexible conduit. Transformer enclosure 

includes a separated wiring compart-

ment and six knockouts for conduit entry. 

Transformer enclosure features perforated 

metal door for easy maintenance access 

and cooler operation. Entire electrical 

assembly (jbox and transformer enclosure) 

is removable from the housing for easy 

maintenance.

Six (6) 12V MR16 lamps mounted in 

adjustable double gimbal. Lamp holders 

are  removable and may be regressed 1” 

for additional cut-off. Lamps can accept 

up to three optical accessories (i.e. lens 

+ hex louver + snoot). 45º x 45º locking 

lamp adjustment.  Beveled-edge lamp 

ring is secured with threadless, bayonet 

action. Optional retractable arm is avail-

able for lamp pulldown and extreme 

aiming.

A mounting frame is provided which 

inserts into the ceiling opening. The 

housing is then pushed through the 

mounting frame and secured with 

screws through the meshplate.

 

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

Ceiling Cut-Out: 5.13” x 24.34”

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for 
downlighting and accent applications. Utilizes SIX (6) 12V MR16 lamps.

For remodel applications. Insulation must be kept 3” from all sides and at least 
1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 121107

NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
71W magnetic transformers are remote and sold separately.

  COMBOLIGHT  

Recessed Six (6) Light

  Remodel 

  37 Watt max. MR16 12V 

  42 Watt max. MR16 12V 

  50 Watt max. MR16 12V

  71 Watt max. MR16 12V

   Electronic Low Voltage 

Transformer

   Magnetic Low Voltage 

Transformer

 120V

 277V 

  Double Gimbal 

  Retractable Double Gimbal

  Trimless

  Trimless

  White 

 Black 

 Industrial Silver