Cooper Lighting SSA Folheto

S T R E E T W O R K S O u t d o o r   L i g h t i n g   S o l u t i o n s

C o o p e r   L i g h t i n g

8 ' — 3 5 '   M O U N T I N G   H E I G H T

1 . . . 356-T6 cast aluminum alloy shoe base with aluminum

alloy knock-in bolt covers.

2 . . . 2" x 4" flush hand hole assembly with internal reinforcing

frame (4" Shaft). 2 1/2" x 4" flush hand hole assembly 
(5", 6", and 6 3/4" shaft). Ground lug located opposite
hand hole opening drilled & tapped for 3/8" 16NC-2
grounding screw.

3 . . . Straight square shaft 6005-T6 aluminum alloy polished

finish.

4 . . . Drilled or Tenon (specify).

5 . . . Anchor bolt per ASTM A576 with (1) nut, (1) flat washer,

and (2) shims. Nuts, washers and threaded portion of bolt
are hot dip galvanized.

[ S e e   o r d e r i n g   i n f o r m a t i o n ]

BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions

[ S e e   o r d e r i n g   i n f o r m a t i o n .   O t h e r   f i n i s h   c o l o r s   a v a i l a b l e . ]

B=Clear Anodized
C=Dark Bronze Anodized
D=Black Anodized
E=Medium Bronze Anodized
F=Dark Bronze Powder Coat
V=Grey Powder Coat
W=White Powder Coat
X=None (natural aluminum)
Y=Black Powder Coat

AB

BP

BC

H

D

Base View

handhole

12 5/16 "

MH

(mounting height)

S

B

Bolt cover at
all four anchor
bolt locations
(force fit)

Bolt cover (shown in place)
flush with casting surface

[ B a s e   w i t h   h a n d   h o l e   a n d   d o o r ]

WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING

WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF 
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.