Cooper Lighting Recessed Single-Lamp Fixture Folheto

www.cooperlighting.com

18” flexible conduit

13.38”

14.20”

19.70”

9.48”

 9.95”

11.31”

13.01”

1.70”

9.45” 

Required 

above 

ceiling

45º x 45º

Adjust

Double 
Gimbal

6.69”

Thermal
Protector

Perforated
Meshplate

Separate Wiring

Compartment

9.25”

4.10” 

Integral Electronic 

Metal Halide Ballasts

Housing and junction box are aluminum,  

trimless meshplate is steel with powder 

coated finish.  Perforated meshplate 

allows for trimless installation in drywall/

plaster ceilings by allowing the ceiling’s 

mudding compound to be applied right 

up to the edge of the fixture opening.  

Includes a beveled “knife-edge” lips to 

ensure a clean edge. Can accommodate 

various ceiling thickness. 

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through branch 

wiring, 6 #12 90º C supply conductors or 

60º C for end of run. The fixture is also UL 

listed as ‘access above ceiling not required’. 

Integral electronic metal halide ballasts are 

mounted in a separate metal enclosure 

box attached to the junction box with 

18” of flexible conduit. Ballast enclosure 

includes a separated wiring compartment 

and two knockouts for conduit entry and 

features a perforated metal door for easy 

maintenance access and cooler operation. 

Entire electrical assembly (jbox and ballast 

enclosure) is removable from the housing 

for easy maintenance.

One (1) T6 G12 Metal Halide lamp with 

reflector mounted in adjustable double 

gimbal. Lamp holder is  removable and 

may be regressed 1” for additional cut-

off. Lamp can accept up to three optical 

accessories (i.e. lens + hex louver + 

snoot). 45º x 45º locking lamp adjust-

ment.  Beveled-edge lamp ring is secured 

with threadless, bayonet action. Optional 

retractable arm is available for lamp 

pulldown and extreme aiming. Includes 

G12 socket.

Mounting clips are provided which 

mount the housing edge flush with the 

finished ceiling line. Mounting clips are 

secured to the housing through the 

meshplate with screws.

 

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

Ceiling Cut-Out: 7.80” x 7.80”

An adjustable Single-lamp Recessed fixture for trimless installation suitable for 
downlighting and accent applications. Utilizes ONE (1) T6 G12 Metal Halide 
lamp.

For remodel applications. Insulation must be kept 3” from all sides and at least 
1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 050108

This fixture utilizes T6 Metal Halide lamp and includes high-

performance clear aluminum reflectors in narrow, medium, 

or wide distributions. Non-standard color reflectors are 

available upon request.

  COMBOLIGHT 

Recessed One (1) Light 
Square

  Remodel

 70 Watt T6 G12 Metal Halide / Narrow

 70 Watt T6 G12 Metal Halide / Medium

 70 Watt T6 G12 Metal Halide / Wide

   Electronic Metal Halide 

Ballast

 120V

 277V 

  Double Gimbal 

  Retractable Double Gimbal

  Trimless

  Trimless

  White 

 Black 

 Industrial Silver