Cooper Lighting MD670T6G12 Folheto
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
07/15/2008 12:08:30 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADP081244
ORDERING INFORMATION
DESCRIPTION
Recessed lens downlight with 6 inch aperture with vertical T4/T6 G12
ceramic metal halide lamp. Available in narrow, medium and wide
distributions. Fixture is suitable for commercial construction. Insulation
must be kept 3" from top and sides of housing. Two stage reflector system
produces smooth distribution with excellent light control and low aperture
brightness.
ceramic metal halide lamp. Available in narrow, medium and wide
distributions. Fixture is suitable for commercial construction. Insulation
must be kept 3" from top and sides of housing. Two stage reflector system
produces smooth distribution with excellent light control and low aperture
brightness.
Mechanical Housing
Steel housing encloses optical
system protecting reflectors from
damage. Tool-less top access
allows service from above. Access
door allows splice inspection and
ballast service through aperture.
Steel housing encloses optical
system protecting reflectors from
damage. Tool-less top access
allows service from above. Access
door allows splice inspection and
ballast service through aperture.
Plaster Frame/Collar
Die cast aluminum 1-1/2" deep
collar accommodates ceiling
materials up to 2".
Die cast aluminum 1-1/2" deep
collar accommodates ceiling
materials up to 2".
Universal Mounting Bracket
Accepts 1/2" EMT, C channel and
bar hangers and adjusts 5"
vertically from above the ceiling.
Accepts 1/2" EMT, C channel and
bar hangers and adjusts 5"
vertically from above the ceiling.
Junction Box
(6) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (12) #12
AWG (six in, six out) 90°C
conductors and feed thru branch
wiring.
(6) 1/2" and (2) 3/4" trade size pry
outs positioned to allow straight
conduit runs. Listed for (12) #12
AWG (six in, six out) 90°C
conductors and feed thru branch
wiring.
Fasteners
All fasteners that must be routinely
loosened or tighten for installation
and or maintenance are to be
captive.
All fasteners that must be routinely
loosened or tighten for installation
and or maintenance are to be
captive.
Re-lamp
Suitable for top or bottom lamp
replacement. A lockout feature
prevents the lamp socket from
being installed in the incorrect
beam distribution position during
service.
Suitable for top or bottom lamp
replacement. A lockout feature
prevents the lamp socket from
being installed in the incorrect
beam distribution position during
service.
Optical Upper Reflector
Clear anodized spun 0.050" thick
aluminum produces narrow,
medium and wide distribution
based on selected lamp center
position.
Clear anodized spun 0.050" thick
aluminum produces narrow,
medium and wide distribution
based on selected lamp center
position.
Lower Shielding Reflector
Hydro-formed 0.050" thick
aluminum parabolic contour
provides 50° lens and lens image
cutoff. Self flanged standard with
optional white painted flange. Also
available with polymer flange.
Available in all standard Alzak®
finishes.
Hydro-formed 0.050" thick
aluminum parabolic contour
provides 50° lens and lens image
cutoff. Self flanged standard with
optional white painted flange. Also
available with polymer flange.
Available in all standard Alzak®
finishes.
Shielding
0.125" thick diffuse glass lens
masks arc tube support wire
image, striations and color
de-mixing common with uncoated
ceramic arc sources. Lens is
captive during lamp replacement.
0.125" thick diffuse glass lens
masks arc tube support wire
image, striations and color
de-mixing common with uncoated
ceramic arc sources. Lens is
captive during lamp replacement.
Trim Retention
Upper and lower reflectors are
held securely together and are
retained with two torsion springs
holding the flange tightly to the
finished ceiling surface.
Upper and lower reflectors are
held securely together and are
retained with two torsion springs
holding the flange tightly to the
finished ceiling surface.
Electrical
Pulse rated G12 ceramic lamp
socket attaches to upper reflector
with three position bracket and
precisely maintains lamp center.
Pulse rated G12 ceramic lamp
socket attaches to upper reflector
with three position bracket and
precisely maintains lamp center.
Insulation Detector
Self resetting detector opens
circuit if insulation is improperly
installed.
Self resetting detector opens
circuit if insulation is improperly
installed.
Ballast
Universal input 120/277V electronic
ballast provides noise free
operation, improved efficiency and
increase lamp life as compared
with magnetic ballast. Regulated
output power over a wide range of
ANSI lamp voltages results in
excellent color stability over time.
Universal input 120/277V electronic
ballast provides noise free
operation, improved efficiency and
increase lamp life as compared
with magnetic ballast. Regulated
output power over a wide range of
ANSI lamp voltages results in
excellent color stability over time.
Quartz Lamp Re-strike Time
Delay System (Q Option)
Internal auxiliary 100W DC bayonet
base T4 quartz lamp (included)
provides low level illumination in
the event of a momentary power
interruption.
Delay System (Q Option)
Internal auxiliary 100W DC bayonet
base T4 quartz lamp (included)
provides low level illumination in
the event of a momentary power
interruption.
Emergency Circuit Lamp (X
Option)
Emergency circuit lamp module for
100W DC bayonet base T4 quartz
lamp (included) by emergency
circuit.
Emergency circuit lamp module for
100W DC bayonet base T4 quartz
lamp (included) by emergency
circuit.
Code Compliance
Thermally protected and cULus
listed for protected wet locations.
Optional City of Chicago
environmental air (CCEA) marking
for plenum applications. EMI/RFI
emissions per FCC 47CFR Part 18
non consumer limits.
Thermally protected and cULus
listed for protected wet locations.
Optional City of Chicago
environmental air (CCEA) marking
for plenum applications. EMI/RFI
emissions per FCC 47CFR Part 18
non consumer limits.
MD620T4G12
MD639T6G12
MD670T6G12
MD639T6G12
MD670T6G12
MD6150T6G12
Ceramic Metal
Halide Lens
Downlight
6" Aperture
10 -3/16”
16-1/16”
[408mm]
[259mm]
5-11/16”
[145mm]
7-1/4”
[185mm]
14-7/16”
[367mm]
E N E R G Y D A T A
Lamp: 20W MH
Input Watts: 26W
Max Current: 120V- 0.22A, 277V-0.11A
Power Factor:>95% T.H.D.:<15%
Min Starting Temperature: 5°F (-15°C)
Lamp: 39W MH
Input Watts: 120V-46W, 277V-45W
Max Current: 120V 0.39A, 277V-0.18A
Power Factor:>95% T.H.D.:<15%
Min Starting Temperature: -20°F (-30°C)
Lamp: 70W MH
Input Watts: 120V-86W, 277V-84W
Max Current: 120V .72A, 277V-0.31A
Power Factor:>90% T.H.D.:<16%
Min Starting Temperature: -20°F (-30°C)
Lamp: 150W MH
Input Watts: 120V-165W, 277V-161W
Max Current: 120V 1.38A, 277V-.69A
Power Factor:>90% T.H.D.:<10%
Min Starting Temperature: -20°F (-30°C)
GP=Graphite
GPH=Graphite Haze
K=Cognac
KH=Cognac Haze
B=Black
GPH=Graphite Haze
K=Cognac
KH=Cognac Haze
B=Black
Ho u s i n g
2E = Electronic,
277V 50/60 Hz
277V 50/60 Hz
B a l l a s t
O p t i o n s
F i n i s h
MD6 = 6” Aperture
T r i m
A c c e s s o r i e s
H=Clear Haze
WMH=Warm Haze
G=Gold
WH=Wheat
WMH=Warm Haze
G=Gold
WH=Wheat
MD6CP = 6” Aperture Chicago
Plenum
Plenum
20T4G12 = 20W T4 G12 CMH lamp
39 T6 G12 = 39W T6 G12 CMH lamp
70 T6G12 = 70W T6 G12 CMH lamp
150 T6G12 = 150W T6 G12 CMH lamp
E = Electronic, UNV
120/277V 50/60 Hz
1E = Electronic,
120V 50/60 Hz
120/277V 50/60 Hz
1E = Electronic,
120V 50/60 Hz
1
Available with 20, 39 and 70 watt only.
6950 = Reflector assembly with
white polymer trim ring
6950X = Reflector assembly with
white polymer trim ring,
accepts quartz standby
lamp
accepts quartz standby
lamp
6951 = Reflector assembly,
self flanged
6951X = Reflector assembly,
self flanged, accepts
quartz standby lamp
quartz standby lamp
W=Gloss White
HB26=
HB50=
RMB22=
HSA6=
TRM6=
TRR6=
FK=
1
3E =Electronic,
347V 50/60 Hz
347V 50/60 Hz
L Channel Bar Hangers, 26” Long, Pair
L Channel Bar Hangers, 50” Long, Pair
Slope Adapter for 6” Aperture Housings;
Specify slope
Specify slope
Wood Joist Bar Hangers, 22” Long, Pair
Metal Trim Ring, White
Rimless Trim Ring, White
Field Installable fuse Kit; Specify Amperage
L a m p T y p e / W a t t a g e
Notes:
X= Emergency
Circuit Lamp
Circuit Lamp
Available with 39, 70 and 150 watt only.
2
2
3
Not available with 20 watt.
WF = White
painted
flange
(self-
flanged
only)
flange
(self-
flanged
only)
Q=Quartz Restrike
System
System
Ll=Low Iridescent
Clear
Clear
3
O p t i o n s
PORTFOLIO