Cooper Lighting Oval Series Manual Do Utilizador

01/17/2008 9:33:15 AM

Consult your representative for additional options and finishes.

ADC042175

The Fail-Safe Harmony VR Oval series provides exceptional aesthetics with 
remarkable strength. The wide variety of products allows an interior and 
exterior theme throughout the entire facility. ADA COMPLIANT is available 
up to 42W maximum. Die-cast extra-heavy aluminum walls of the housings 
offer rugged durability and afford efficient heat dissipation. The combina-
tion of narrow prismatic blondels on the interior and a prescription texture 
on the exterior of the lens provides exceptional lamp obscuration. The 
Eyelid option provides an excellent cutoff for the luminaire. The Harmony 
VR family carries a Lifetime Warranty against breakage.

Reflectors
All Harmony VR Oval luminaires 
are provided with a white polyester 
powder coat reflector with 94% 
total reflectivity. 70W and higher 
HID lamps use highly specular 
aluminum material.

Housing
Precision .125" thick heavy-duty 
die-cast aluminum housing 
promotes durability and efficient 
heat dissipation through integral 
ballast heat sinks. Marine-grade 
low copper alloy aluminum resists 
corrosion. Back casting in 3 sizes to 
accommodate high wattage HID 
and CFL lamp capabilities.

Lens
One-piece injection molded 
polycarbonate, .125" thick or 
optional .250" thick borosilicate 
glass. In clear prismatic or opal 
(polycarbonate only), the lens is 
scientifically designed to obscure 
lamp image while maintaining 
efficiency. The state-of-the-art 
design consists of an internal 
prism designed to spread the light 
evenly, in combination with a 
texture prescription on the exterior 
of the polycarbonate lens. This 
new design concept substantially 
reduces glare. Attached with 4 
recessed stainless-steel tamper 
resistant center pin reject TORX® 
fasteners.

Sockets/Ballasts
HID and incandescent sockets are 
porcelain medium base sockets 
with nickel-plated brass screw 
shell. HID ballasts are standard 
magnetic HPF, with a minimum 
starting temperature of -40°C 
(-40°F) for HPS and -30°C (-20°F) 
for MH. Electronic ballast with 
universal voltage 120-277V 
standard with T6 MH lamps and 
are optional for 50W and 70W MH 
ED17 lamps. Compact fluorescent 
sockets are polycarbonate and 
incorporate 26-watt GX24q3; 
32-watt GX24q3; 42-watt GX 24q4; 
57-watt GX24q5; or 70-watt 
GX24q6 base with a 2-pin reject 
that ensures proper lamping. 
Compact Fluorescent ballasts are 
electronic, universal voltage 
120-277V less than 10% harmonic 
distortion, with minimum starting 
temperatures of 0°C (32°F) for 26, 
32, 42W and -18°C (0°F) for 57 and 
70W.

Decorative Faces
Border, Vertical Eyelid, Horizontal 
Eyelid, Short Band, Long Band and 
Four Quadrant faces consist of 
high-impact, injection molded, 
.125"
minimum thickness, polycarbonate 
overlay attached to the lens with 
stainless steel fasteners. 
Polycarbonate lens and overlay

attach to housing with four 
recessed TORX® fasteners. 
Custom faces available-consult 
Cooper Lighting Representative.

Finish
Injection molded color is matte 
black standard or matte white 
painted. The VariColor option is 
available on all decorative faces. 
VariColor paint option allows 
perfect matching to official 
organizational color(color chip 
requested for correct match).

Die-cast Housing Finish
Polyester-powder coat paint is 
applied in a five-stage process at 
2.0-mil thickness and baked to 
400°F. The finish is TGIC, textured, 
thermoset, and polyester powder 
coat. Finish is 500-hour-salt-spray 
test rated and has an impact rating 
of 160 inch-pounds.

Gasket
Extruded silicone O ring gasket 
provided on die-cast components 
to provide additional sealing 
against entry of water and bugs. 
On Borosilicate Glass lens a 
one-pieced molded silicone gasket 
is mechanically fastened to lens 
assembly to provide consistent 
seal between lens and housing. 
Die-cut sponge gasket provided for 
seal against wall and connector 
box. Fully gasketed assembly is 
IP66 rated for maximum protection 
from dirt and water.

Lamps
All metal halide fixtures with 
polycarbonate lenses will be 
shipped with UV-Guard 
lamps-standard. All other units 
supplied less lamp unless specified 
with "L" option.

Labels
UL and CUL listed for wet location 
standard. High Pressure hose 
down rated for 200 PSI. Available 
to mount on combustible or 
non-combustible surfaces. See 
notes for maximum lamp wattages 
and mountings.

SERIES

HARMONY VR 15"

10” [254mm]

3 7/8” 

[98mm]

15”

[381mm]

FAIL-SAFE