Cooper Lighting H456ICAT120D Manual Do Utilizador

Catalog #

Project

Comments

Prepared by

Type

Date

HALO LED H4 Series
The Halo H4 LED is a family of 4” aperture recessed downlight  
housings designed for use with Halo EL4 Series LED Light Engines 
and compatible 4” LED trims.  Halo H4 LED housings have integral 
LED drivers that offer dimming as a standard feature.
H456ICAT120D is an insulated ceiling, AIR-TITE

TM

 housing offering 

120 volt dimming capability with many incandescent or electronic 
low voltage dimmers. Designed for use with EL4 series LED Light 
Engines and TL4 LED Series Trims, the H456ICAT120D offers high 
quality downlighting along with high efficacy – the result being great 
lighting and significant energy savings.

MECHANICAL
Housings
•  Box enclosure of formed  

 

  aluminum construction.
•  Openings are gasketed  

 

  AIR-TITE.
•  Designed for insulated ceilings in  
  direct contact with insulation.  
  (May also be installed in  

 

  non-insulated ceilings.)
Plaster Frame
•  Galvanized steel die-formed  
  construction.
•  The housing can be removed from  
  plaster frame to provide access to  
  the junction box.
•  Plaster frame features include:
  -  Patented regressed locking screw  
    positioned for securing hanger  
    bars from below the ceiling.
  -  Cutouts for easily crimping  
    hanger bars in position.
  -  AIR-TITE aperture gasket is  
    pre-installed.
  -  HALO identity embossed on  
    plaster frame.
GOT NAIL! Pass -N-Thru™  

Bar Hangers
•  Pre-installed nail easily installs  
  in regular lumber, engineered  
  lumber and laminated beams.
•  Safety and guidance system  
  prevents snagging, ensures   
  smooth straight nail penetration  
  and allows bar hangers to be easily  
  removed if necessary.
•  Automatic leveling flange aligns  
  the housing and lets you hold the  
  housing in place with one hand  
  while driving nails.
•  Housing can be positioned at any  
  point within 24” joist span.
•  Pass-N-Thru™ feature allows bar  
  hangers to be shortened without  
  removing from plaster frame.
•  Score lines allow “tooless”   
  shortening for 12” joists.
•  Bar hangers may be repositioned  
  90°.
•  Integral T-bar clip snaps onto  
  T-bars - no additional clips    
  required.
Slide-N-Side™ Junction Box
•  Positioned to accommodate  
  straight conduit runs
•  Seven 1/2” trade size conduit  
  knockouts with true pry-out slots
• Slide-N-Side™ wire traps allow  
  non-metallic sheathed cable to be 

  installed without tools and    
  without removing knockouts.
•   Accepts a wide range of  

 

  non-metallic (type NM) sheathed  
  cables - the standard cable types  
  used in lighting in both U.S. and  
  Canada.
  -  Allows wiring connections to be  
    made outside the junction box
  -  Simply insert the cable directly  
    into the trap after connections  
    are made. 
  -  Accommodates the following  
    standard non-metallic sheathed  
    cable sizes:
    (US) #14/2, #14/3, #12/2, #12/3
    (Canada) #14/2, #14/3, #12/2
LED Connection
•  LED connector is a non-screw base  
  connector offering easy installation  
  with the EL4 Series LED Light  
  Engine.
•  LED connector meets California  
  Title-24 high-efficacy luminaire  
  requirement for a non-screw  
  base socket, and where required  
  to qualify as a high-efficacy   
  luminaire.
LED Driver
•  LED dimmable driver mounts  
  to the housing.
•  Driver is a120 Volt, high efficiency,  
  electronic power supply providing  
  low voltage power to EL Series  
  LED Light Engines.
•  Driver meets FCC EMI/RFI    
  Consumer Level limits for use in  
  residential and commercial   
  installations.
•  Driver features high power factor  
  and low THD and has integral  
  thermal protection in the event  
  of over temperature or internal  
  failure.
•  Driver is specifically designed  
  for compatibility with EL4 LED  
  Light Engines, and operates the  
  LED for long life, meeting 50,000  
  hour / 70% lumen maintenance  
  standard.
•  If dimming is not required the  
  fixture can be operated from a  
  standard wall switch.
Dimming
•  The HALO H4 LED luminaire is  
  dimmable to 15% with most  
  standard 120V dimmers;  

 

  including LED-rated and 
  electronic low voltage dimmers  
  (recommended); many 

  incandescent and magnetic low  
  voltage dimmers; and dims to 5%  
  using dimmers with low end trim  
  adjustment.
•  Standard incandescent dimmers  
  require a minimum load of    
  typically over 40 watts on the  
  circuit for full range dimming  
  performance (four LED modules).
•  For dimming with digital (smart)  
  multi-location dimmers or when  
  dimming fewer than four LED  
  modules, LED rated or electronic  
  low voltage dimmers are required  
  (ELV dimmers need a neutral  
  connection in the wallbox).
Labels
•  UL/cUL Listed 1598 Luminaire
•  UL/cUL Listed for Damp Location
•  UL/cUL Listed for Wet Location,  
  covered ceiling - with select trims
•  UL/cUL listed for Feed Through
•  UL/cUL listed for Direct Contact  
  with insulation and combustible  
  material
Compliance
•  Use with designated LED light  
  engines and trims for ENERGY  
  STAR

®

 qualification.

•  Can be used for State of California  
  Title 24  high efficacy compliance  
  with designated LED light engines  
  and trims.
•  Can be used for International  
  Energy Conservation Code (IECC)  
  high efficacy compliance with  
  designated LED light engines  
  and trims.
•  Refer to specification sheets online  
  for compliance information.
Qualification
IC and AIR-TITE™
Certified under ASTM-E283 and 
listed UL/cUL 1598. May be used to 
meet insulated ceiling and restricted 
air-flow requirements such as:
  • Washington State Energy Code
  • International Energy  

 

    Conservation Code (IECC)
  •  New York State Energy    
    Conservation Construction  
    Code (NY-ECCC)
  •  State of California Title 24   
    “Recessed Luminaires in    
    Insulated Ceilings.”

H4 Series LED Energy Data:
(Values at non-dimming line voltage.)

Minimum Starting Temp: -30°C (-22°F)

EMI/RFI: FCC Title 47 CFR, Part 18  

(Consumer)

Sound Rating: Class A standards

Input Voltage: 120V

Power Factor: >0.90

Input Frequency: 50/60Hz

THD: <20%

Rated Wattage: 15W max.

Input Power: 14.0W

Input Current: 121mA

Driver Compliance: UL6950, LPS rated

Maximum IC (Insulated Ceiling) Ambient 

Continuous Operating Room Temperature: 

25°C (77°F)

Maximum Non-IC (Non-Insulated Ceiling) 

Ambient Continuous Operating Room  

Temperature: 40°C (104°F)
H4 Series LED 
Summary Lighting Data:

Lumen range: . . . . . . . . . . . . .534-700
Lumens per watt: . . . . . . . . . . up to 46
Color
Correlated Color Temperature
(CCT): . . . . . . . . . . . . . . .2700K-4000K
Color Rendering Index (CRI, Ra): . . . 80

www.cooperlighting.com

ADV110681

rev 4/8/11

®