DMP Electronics XR2400F Manual Do Utilizador

14

This displays any addition, deletion, or change to a user code.

User 19 added by user 12 at 11:41 

AM

.

Press the Select key under either user
(US:) number for the user name.

User Code Event Types - There are 3 event types you may see here:

ADD - User added

DEL - User deleted

CHG - User code or authority level has been changed.

This displays the date and time of an automatic test report.

The test report was sent to the central

station at the date and time shown.

This displays any problems with the system's AC power, battery, or
phone line(s) or any opening of a tampered panel box.

 Display

An AC failure occurred on Oct. 17. Press

the SELECT key under 10/17 for the time
the failure occurred.

This section of the user’s guide shows the User's Guide Display
Events items for the Fire Command Center and Remote Fire Command
Center displays. While in the Display Events function, use the
COMMAND and ARROW keys to go forward or backward through the
list of events.

This section displays alarms, troubles, and other events that could
occur on your protection zones.  Some of the Zone and Event types
listed here are not applicable to the XR2400F.  Please disregard any
displays that are not discussed in this User’s Guide.

An alarm occurred at 10:23 

PM

 on Oct. 17.

Press any SELECT key to see the zone
number and zone type.

Zone Type - There are 7 possible zone types you may see here.

FIRE - Fire

PANC - Panic

BURG - Burglary

EMRG - Emergency

SUPV - Supervisory

AUX1 - Auxiliary 1

AUX2 - Auxiliary 2

Event Types - There are 7 event types you may see here:

ALR - Alarm

TBL - Trouble

RST - Restore

LOW - Low battery

MIS - Missing wireless transmitter

FLT - Zone Fault

SVC - Service smoke detector