First Alert SCO5LB Folheto

Most accurate technology available for 
detecting carbon monoxide as compared to 
other sensing technologies.

Provides 360 degrees of direct access 
to the smoke sensing chamber.

Varying horn tone makes it easier for elderly 
with normal age related hearing loss to hear 
the alarm.

Provides audible notice when alarm 
needs to be replaced.

Pins are provided to lock battery drawer 
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.

First Alert Model SCO5 is a battery operated single station photoelectric smoke 
and carbon monoxide combination alarm specifically designed for residential and 
institutional applications including sleeping rooms of hospitals, hotels, motels, 
dormitories, and other multifamily dwellings as defined in standard NFPA 101. 
Model SCO5 has been fully tested and complies with, UL217, UL2034, CSFM, 
NFPA 72, and NFPA 101 and other agencies that model their codes after the 
above agencies. It meets building codes where battery operated photoelectric 
smoke and carbon monoxide combination alarms are required and with model 
building codes published by the ICC.

First Alert Model SCO5 is a state of the art smoke and CO combination alarm 
designed to provide early warning of a fire or carbon monoxide danger. It 
features a photoelectric smoke sensing chamber and an electrochemical CO 
sensor. It features a Sweeping Horn Tone that has a lower and varying frequency 
that makes it easier for the elderly with normal age related hearing loss to hear 
the horn. Two AA alkaline batteries power supply, an End of Life feature and a 
single button test/silence. This alarm has two silence features. Low Battery 
Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm 
Silence: Silence alarm for several minutes. Optipath 360 technology

TM

 provides 

360 degrees of direct access to the smoke sensing chamber. It also features 
tamper resistant locking pins that lock the alarm to the mounting bracket and/or 
the battery drawer to prevent removal of battery. Battery installation and removal 
can occur while the unit is mounted to the ceiling or wall via the slide out battery 
drawer. Designed for wall or ceiling 
mounting. Includes 
mounting anchors 
and screws.