LST 16589 Folheto

Página de 2
0832–CPD–0595
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
IR3-16589_DBL_LST_EN_0850.PDF • PAGE 1
A
Building Safety. Building Security.
Description
•   Triple infrared sensor
according to EN 54-10, Class 1
•   Detection of open fl ames through 
fl ickering infrared radiation
•   Very high immunity to deceptive 
alarms
•  Selectable response delay
•   Relay contacts for alarm and fault
•  Integrated optical test function
The Flame Detector 16589 responds to the fl ickering 
infrared radiation of open fl ames. Therefore, it is extre-
mely well suitable for the detection of fi res which are 
diffi cult to detect with common smoke detectors – for 
example, alcoholic fi res or gas fl ames.
The detector is ideal for the following applications:
  • Pharmaceutical industry
  • Paint shops
  • Warehouses
  • Nuclear facilities
  • Tunnels
With  three  independent  infrared  sensors  for  different 
wavelengths and with an intelligent evaluation logic, the 
detector can safely distinguish between alarm situati-
ons and deceptive alarms. Therefore, it is particularly 
insensitive  to  disturbance  sources  such  as  sunlight, 
fl uorescent lamps or electric arcs.
The detector complies with EN 54-10, Class 1, which 
means it is suitable to detect fl ames up to a distance 
of 25m.
The response delay of the detector can be selected in 
4 steps between 1 and 8s. An alarm and a fault conditi-
on is signalled via two dry relay contacts. Conventional 
technology  is  used  for  alarm  transmission  to  the  fi re 
detection control panel. The detector can be integra-
ted into an ADM loop by means of a conventional zone 
module.
A  simple  test  of  the  detector  can  be  carried  out  by 
means of the integrated optical self test function, which 
does not require additional tools. During this self test, 
a built-in infrared source simulates a fi re situation which 
activates the detector.
The detector has been designed for indoor and outdoor 
use. The optional Detector Mounting Bracket 7127 al-
lows stepless horizontal and vertical adjustment for the 
easy adaptation of the detector to the required monito-
ring area.
For use in explosion-hazardous areas, an Ex version of 
the fl ame detector is available on request.