ONKYO SKW-501 (SKS-HT518)POWERED SUBWOOFER Manual Do Utilizador

Página de 12
 
10
 
Troubleshooting
 
Symptom
Possible cause
Remedy
 
There’s no sound com-
ing from certain speak-
ers?
 
The speaker cables are not connected 
properly.
Check the speaker cables and correct as nec-
essary.
The speaker configuration is not set cor-
rectly.
Check the speaker configuration.
 
The subwoofer does not 
turn on?
 
The power plug is not fully inserted into 
the wall outlet.
Insert the power plug fully into the wall out-
let.
 
The subwoofer pro-
duces no sound?
 
The OUTPUT LEVEL control is set to 
minimum.
Turn up the OUTPUT LEVEL control.
The RCA cable is not properly connected 
to the subwoofer’s LINE INPUT.
Make sure that the RCA cable is properly 
connected to the subwoofer’s LINE INPUT.
The level of the input signal was too low 
and the subwoofer entered Standby 
mode.
Slightly increase the subwoofer pre out out-
put level on your AV receiver.
The Subwoofer configuration is not set 
correctly.
Check the subwoofer setting in the speaker 
configuration on your AV receiver.
 
The subwoofer pro-
duces hardly any 
sound?
 
The source material contain little or no 
bass content.
Choose source material with more bass con-
tent.
 
A humming sound can 
be heard from the sub-
woofer?
 
The RCA cable is not properly connected 
to the subwoofer’s LINE INPUT.
Make sure that the RCA cable is properly 
connected to the subwoofer’s LINE INPUT.
External interference from a TV or other 
electronic device is being picked up.
Move the subwoofer and RCA cable away 
from the interference source. Make sure your 
audio system is grounded properly.
HTP-518_SKS-HT518_En.fm Page 10 Wednesday, March 12, 2008 3:57 PM