Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. SKW-340
  5. Manual Do Utilizador

ONKYO SKW-340 Manual Do Utilizador

Download
Página de 60
 
38
 
Using the Tuner
 
With the built-in tuner, you can enjoy AM and FM radio 
stations. You can store your favorite stations as presets 
for quick selection.
 
AM Frequency Step Setup
 
(not North America and Europe)
 
Here you can specify the AM frequency step used in 
your area. When this setting is changed, all radio presets 
are deleted.
 
Note:
 
• This procedure can also be performed on the remote 
controller by using its [SETUP] button, arrow buttons, 
and [ENTER] button.
 
■
 
Auto Tuning  Mode
 
■
 
Manual Tuning  Mode
 
The American model changes FM frequency in 0.2 MHz 
steps, 10 kHz steps for AM. For other models it’s 
0.05 MHz steps for FM and 9 kHz or 10 kHz steps for 
AM.
When tuned into a station, the TUNED indicator 
appears. When tuned into a stereo FM station, the FM 
STEREO indicator appears on the display, as shown.
 
Tuning into weak FM stereo stations
 
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to 
Manual Tuning mode and listen to the station in mono.
 
Note:
 
• You can also use the remote controller’s Up and Down 
[
]/[
] buttons to tune the radio.
 
Listening to the Radio
 
1
 
Use the [TUNER] input selector 
button to select either AM or FM.
 
In this example, FM has been selected.
(Actual display depends on country.)
 
1
 
Press the [SETUP] button to dis-
play “0. Hardware Setup,” and 
then press [ENTER].
 
2
 
Use the Up and Down [
]/[
] 
buttons to select “AM Freq,” and 
then use the Left and Right 
[
]/[
] buttons to select:
 
10 kHz:
 
Select if 10 kHz steps are 
used in your area.
 
9 kHz:
 
Select if 9 kHz steps are used 
in your area.
 
3
 
Press the [SETUP] button.
 
Setup closes.
TONE
+
STEREO
LISTENING MODE
DISPLAY DIGITAL INPUT
RT/PTY/TP MEMORY TUNING MODE
RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES
MULTl CH
DVD
VIDEO 1/VCR
VIDEO 2
VIDEO 3
TAPE
TUNER
CD
MASTER VOLUME
A   SPEAKERS   B
TUNING
TUNER
SETUP
TUNING MODE
TUNER
Band
Frequency
 
Tuning into Radio Stations
 
1
 
Press the [TUNING MODE] button 
so that the AUTO indicator 
appears on the display.
 
2
 
Press the TUNING Up or Down 
[
]/[
] button.
 
Searching stops when a station is 
found.
 
1
 
Press the [TUNING MODE] button 
so that the AUTO indicator disap-
pears from the display.
 
2
 
Press and hold the TUNING Up or 
Down [
]/[
] button.
 
The frequency stops changing when 
you release the button.
Press the buttons repeatedly to change 
the frequency one step at a time.
TUNING MODE
TUNING / PRESET
ENTER
TUNING MODE
TUNING / PRESET
ENTER
AUTO
TUNED
FM STEREO
HT-S590_En.book Page 38 Wednesday, February 1, 2006 4:26 PM