ONKYO ST-V10X Manual Do Utilizador

 

17

 

• Refer to the Instruction Manual of your amp as well as the instructions given here.
• Before you make connections, turn off the power of all the equipment you’re going to con-

nect, and disconnect all power cords from electrical outlets. Don’t plug in the DV-S155X’s
power cord yet.

• When making connections, make sure that the plug is

inserted all the way into the jack.

 

Since the DV-S155X contains components that are vulnerable to heat, don’t place it on top of an
amp or other source of heat. Doing so can cause malfunctions.

 

1

 

Connect an amp that supports Dolby Digital or DTS, such as the PR-155X
This allows you to enjoy Dolby Digital or DTS audio.

 

2

 

Connect the audio inputs of your television

 

■

 

Use an optical cable to connect the DV-S155X’s AUDIO OUTPUT DIGITAL OPTICAL jack
to the optical digital input jack of your amp.
Use the included audio connection cable to connect the DV-S155X’s AUDIO OUTPUT ANA-
LOG jacks to the audio input jacks of your amp.

 

You can enjoy 5.1 ch playback with DVD video simply by connecting the digital jack. However
you will need to make the analog connections as well if you want to perform analog recording
from the DV-S155X onto an MD recorder or other device connected to the amp, or in order to
enable system operation with an Onkyo-manufactured amp.

Incomplete connection

Insert all the way in

SW LV L CTRL

STANDBY / ON

STANDBY

INPUT

SURROUND

MEMORY

TIMER

CLEAR

PHONES

MULTI JOG

AV CONTROLLER

MASTER VOLUME

DTS

PCM

AAC

DIGITAL

DSP STEREO

(

GRN

 )

MULTI IN

(

RED

 )

PR-

155X

PUSH TO ENTER

PL

Optical cable (included)

Audio connection cable (included)

DV-S155X-En.book Page 17 Saturday, July 24, 2004 2:20 PM