ONKYO SKW-550 Manual Do Utilizador

 

55

 

This section explains how to record the selected input 
source to a component with recording capability, and 
how to record audio and video from different sources.

You can only record to a component that’s connected to 
the TAPE OUT or VCR/DVR OUT jacks.
See pages 24–35 for information on connecting your AV 
components. 

 

• You cannot record from a component that’s connected 

to a digital input. Only analog inputs can be recorded.

• The surround sound effects provided by the listening 

modes cannot be recorded.

• You cannot record from a component that’s connected 

to the multichannel DVD input.

• If you select another input source while recording, that 

input source will be recorded instead.

• While the Pure Audio listening mode is selected, the 

VCR/DVR OUT V and S jacks don’t output video sig-
nals, so select another mode when recording.

You can overdub audio onto your video recordings by 
simultaneously recording audio and video from two sep-
arate sources. This is possible because only the audio 
source is switched when an audio-only input source, 
such as TAPE, TUNER, or CD, is selected, the video 
source remains the same.

In the following example, audio from the CD player con-
nected to the CD IN jacks, and video from the camcorder 
connected to the AUX INPUT VIDEO jack are recorded 
by the VCR connected to the VCR/DVR OUT jacks.

 

This selects the CD player as the audio source, but 
leaves the camcorder as the video source.

 

Video from the camcorder and audio from the CD 
player are recorded by the VCR.

 

Audio signals from the selected input 
source are output by the TAPE OUT 
and VCR/DVR OUT jacks.
You can listen to the source while 
recording. The AV receiver’s VOL-
UME control has no effect on record-
ing.

HT-SR800_En.book Page 55 Tuesday, January 30, 2007 11:09 AM