ONKYO SKM-750XS L Manual Do Utilizador
42
First Time Setup
This section explains the settings that you need to make before using the AV receiver for the very first time.
With the supplied calibrated microphone, Audyssey
2EQ
2EQ
®
automatically determines the number of speakers
connected, their size for purposes of bass management,
optimum crossover frequencies to the subwoofer (if
present), and distances from the primary listening posi-
tion. Audyssey 2EQ then removes the distortion caused
by room acoustics by capturing room acoustical prob-
lems over the listening area in both the frequency and
time domain. The result is clear, well-balanced sound for
everyone. Enabling Audyssey 2EQ allows you to also
use Audyssey Dynamic EQ, which maintains the proper
octave-to-octave balance at any volume level. (See
page 72)
optimum crossover frequencies to the subwoofer (if
present), and distances from the primary listening posi-
tion. Audyssey 2EQ then removes the distortion caused
by room acoustics by capturing room acoustical prob-
lems over the listening area in both the frequency and
time domain. The result is clear, well-balanced sound for
everyone. Enabling Audyssey 2EQ allows you to also
use Audyssey Dynamic EQ, which maintains the proper
octave-to-octave balance at any volume level. (See
page 72)
Measurement Positions
To create a listening environment in your home theater
that all listeners will enjoy, Audysssey 2EQ takes mea-
surements at up to three positions within the listening
area.
that all listeners will enjoy, Audysssey 2EQ takes mea-
surements at up to three positions within the listening
area.
A
First measurement point
This is the center point of the listening area, or the
listening position.
listening position.
B
Second measurement point
The right side of the listening area.
C
Third measurement point
The left side of the listening area.
The distances between points
1
and
2
and points
1
and
3
must be at least 1 meter.
From the examples below, choose the listening area that
best matches yours and place the microphone accord-
ingly when prompted.
best matches yours and place the microphone accord-
ingly when prompted.
Using Audyssey 2EQ
®
Automatic Speaker Setup
TV
TV
TV
TV
TV
TV
TV
TV
TV
:
:
Listening area
Listening position
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected
to the composite video or S-Video MONITOR OUT,
or the COMPONENT VIDEO OUT, use the HT-
R667’s own display when changing settings.
connected to the HDMI OUT. If your TV is connected
to the composite video or S-Video MONITOR OUT,
or the COMPONENT VIDEO OUT, use the HT-
R667’s own display when changing settings.
1
Turn on the AV receiver and the
connected TV.
connected TV.
On the TV, select the input to which the
AV receiver is connected.
AV receiver is connected.
Notes:
• If the AV receiver is muted, it will be unmuted
• If the AV receiver is muted, it will be unmuted
automatically when the automatic speaker setup
starts.
starts.
• Automatic speaker setup cannot be performed
while a pair of headphones is connected.
• It takes about 10 minutes to complete the auto-
matic speaker setup for three positions. Total mea-
surement time varies depending on the speakers.
surement time varies depending on the speakers.
• Do not connect or disconnect any speakers during
the automatic speaker setup.
3-7
ON/STANDBY
STANDBY
SPEAKERS
TONE
MOVIE/TV
MUSIC
GAME
DISPLAY
DIMMER
MEMORY
CLEAR
DIGITAL INPUT
TUNING MODE
B
A
PHONES
MULTI CH
DOCK
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
CD
SETUP
SETUP MIC
VIDEO
L AUDIO R
AUX INPUT
ENTER
RETURN
TUNING
PRESET
MASTER VOLUME
AV RECEIVER
HT-R667
LISTENING MODE
1
2, 8
ON/STANDBY
HT-S6100_En.book Page 42 Tuesday, July 1, 2008 4:58 PM