ONKYO Y1105-1 Folheto

Y1105-1

2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023  Fax: 072-831-8163
http://www.onkyo.com/

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-229-1687, 201-785-2600  Fax: 201-785-2650  
http://www.us.onkyo.com/

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555  
http://www.eu.onkyo.com/

The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: +44-(0)1628-473-350  Fax: +44-(0)1628-401-700

Unit 1 & 12, 9/F, Ever Gain Plaza Tower 1, 88, Container Port Road, Kwai Chung, 
N.T., Hong Kong.  Tel: 852-2429-3118  Fax: 852-2428-9039
http://www.ch.onkyo.com/

1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, 
China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396

SN 29400781

(C) Copyright 2011 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved.

*   2   9   4   0   0   7   8   1   *

    

 

*

Configuration of the rubber stoppers may be different from the figure, such as being 2 sheets instead of 1 sheet, but the total number will be same.

We recommend using the supplied rubber stoppers to achieve 
the best possible sound from your speakers. 
The rubber stoppers prevent the speakers from moving, 
providing a more stable platform.

The front, center and surround speakers have detachable grilles.
See the right illustrations to attach or detach them.

   

(White)

(Red)

(Green)

(Blue)

(Gray)

Speaker terminals 

SKF-648
SKR-648

Speaker terminals 

SKC-648

Rubber stoppers

Bottom of the 
SKF-648
SKR-648

Bottom of the 
SKC-648

Rubber stoppers

Removal

Replacement

■

■

• The Auto Standby function turns the subwoofer on when the input signal exceeds a 

certain level. If the Auto Standby function does not work reliably, try slightly increasing 
or decreasing the subwoofer output level on your receiver.

• If the Standby/On indicator lights (both red and blue LEDs) several seconds or minutes 

after the sound output stopped, this means that the amp protection circuit has been acti-
vated. In this case, set the OUTPUT LEVEL control to the center position, and discon-
nect the power cord from the AC outlet. Wait at least 10 seconds, and then reconnect the 
power cord. If that doesn’t solve the issue, contact your Onkyo dealer.

To set the level of the subwoofer, use the OUTPUT LEVEL control. 
Set it so that bass sounds are evenly balanced with the treble sounds 
from the other speakers. Because our ears are less sensitive to very 
low bass sounds, there’s a temptation to set the level of the 
subwoofer too high. As a rule of thumb, set the subwoofer level to 
what you think is the optimal level, and then back it off slightly.

If the subwoofer is placed on a hard floor 
(wood, vinyl, tile, etc.) and playback is very 
loud, the subwoofer’s feet may damage the 
flooring. To prevent this, place the supplied 
pads underneath the subwoofer’s feet. The pads 
also provide a stable base for the subwoofer.

4 floor pads 

STANDBY/ON indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-501E 
automatically turns on when an input signal is 
detected in Standby mode. When there’s no input 
signal for a while, the SKW-501E automatically 
enters Standby mode.

POWER switch
Press this switch to the ON position to turn on the 
power. Press it to the OFF position to turn off the 
power.

OUTPUT LEVEL control
This control is used to adjust the volume of the 
subwoofer.

LINE INPUT
This RCA input should be connected to the 
subwoofer pre out on your AV receiver with 
supplied RCA cable.

To AC outlet

Pad

The Home Cinema means that you can enjoy surround sound with a real sense of movement in your own home — just like being in 
a movie theater or concert hall.

Corner 
position

1/3 of wall 
position

Center speaker (SKC-648) 

Position it close to your TV (prefer-
ably on top) facing forward at about 
ear level, or at the same height as the 
front left and right speakers.

Front left and right speakers (SKF-648) 

They should be positioned facing the listener at about ear level, 
and equally spaced from the TV. Angle them inward slightly so as 
to create a triangle, with the listener at the apex.

Surround left and right speakers (SKR-648) 

Position them at the sides of the listener, or 
slightly behind, about 60 to 100 cm above ear 
level. Ideally they should be equally spaced 
from the listener.

Subwoofer (SKW-501E) 

The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects) 
channel and bass from the satellite speakers when a crossover is specified. 
The volume and quality of the bass output from your subwoofer will depend 
on its position, the shape of your listening room, and your listening position. 
In general, a good bass sound can be obtained by installing the subwoofer in 
a front corner, or at one-third the way along the front wall, as shown.

Red

White

Green

Front right 

speaker

Center speaker

Gray

Front left 

speaker

Surround right 

speaker

Read the following before connecting your 
speakers:
• Turn off your receiver before making any 

connections.

• Pay close attention to speaker 

wiring polarity. Connect 
positive (+) terminals to only 
positive (+) terminals, and 
negative (–) terminals to only negative (–) 
terminals. If the speakers are wired 
incorrectly, the sound will be out of phase 
and will sound unnatural.

• Be careful not to short the positive and 

negative wires. Doing so may damage 
your amp.

Powered 

subwoofer

*

Using the supplied RCA cable, 
connect the subwoofer’s LINE 
INPUT to your AV receiver’s 
SUBWOOFER PRE OUT jack.

Blue

Surround left 

speaker

■

■

■

■

Specifications and appearance are subject to change without 
prior notice.

For non-magnetic shielded speakers:
Try moving the speakers away from your TV or monitor. If discoloration should occur, turn off your TV or monitor, wait 15 to 30 
minutes, and then turn it back on again. This normally activates the degaussing function, which neutralizes the magnetic field, 
thereby removing any discoloration effects.

Bass-Reflex

410 mV / 20 k

Ω

80 watts minimum continuous power, 
4 ohms, driven at 100 Hz with a 
maximum total harmonic distortion of 
1 %

27 Hz to 150 Hz

24.5 L

× H × D)

230 mm × 425 mm × 412 mm
(incl. grille and projection)

9.1 kg

20 cm Cone Woofer × 1

(HTP-648)  AC 230V, 50Hz

(SKS-HT648) AC 220-240V, 50/60 Hz

105 W

Auto Standby function
Non-magnetic shielding

2 Way Closed Box

6 

Ω

130 W

79 dB/W/m

70 Hz to 50 kHz

7 kHz

0.9 L

× H × D)

102 mm × 170 mm × 105 mm
(incl. grille and projection)

1.0 kg

8 cm Cone Woofer × 1
2.5 cm Balanced Dome Tweeter × 1

Spring type color coded

Detachable

Available

Magnetic shielding

2 Way Closed Box

6 

Ω

130 W

82 dB/W/m

70 Hz to 50 kHz

7 kHz

1.3 L

× H × D)

277 mm × 110 mm × 110 mm
(incl. grille and projection)

1.7 kg

8 cm Cone Woofer × 2
2.5 cm Balanced Dome Tweeter × 1

Spring type color coded

Detachable

Available

Magnetic shielding

Full Range Closed Box

6 

Ω

130 W

80 dB/W/m

80 Hz to 20 kHz

0.9 L

× H × D)

102 mm × 170 mm × 105 mm
(incl. grille and projection)

0.9 kg

8 cm Cone × 1

Spring type color coded

Detachable

Available

Magnetic shielding