ONKYO HT-R550 Manual Do Utilizador

 

59

 

• The Center and Subwoofer distances can be set up to 

5 ft. (1.5 m) more or less than the Front distance. For 
example, if the Front distance is set to 20 ft. (6 m), the 
Center and Subwoofer distances can be set between 15 
and 25 ft. (4.5 and 7.5 m).

• The Surround and Surround Back distances can be set 

up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the 
Front distance. For example, if the Front distance is set 
to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, 
and Surr Back L distances can be set between 5 and 25 
ft. (1.5 and 7.5 m).

• The speaker distance cannot be adjusted while a pair 

of headphones is connected, speaker set B is on, or the 
multichannel DVD input is being used.

 

You can set the volume level of each speaker so that all 
speakers can be heard equally at the listening position.

 

• A quick way to adjust the speaker levels is to press the 

remote controller’s [TEST TONE] button to turn on 
the test tone, use the [LEVEL–] and [LEVEL+] but-
tons to adjust the levels, and use the [CH SEL] button 
to select the speakers.

• The speaker levels cannot be adjusted while a pair of 

headphones is connected, speaker set B is on, or the 
AV receiver is muted.

 

Setup closes.

 

A pink noise test tone is output by the 
front left speaker.

These settings are set automatically by the Automatic 
Speaker Setup function (see page 37).

 

As each speaker outputs the test tone, 
its name appears on the display.

 

The levels can be adjusted from –12 to 
+12 dB in 1 dB steps (–15 to +12 dB 
for the subwoofer).

 

Speakers that you set to No or None in 
the Speaker Configuration (page 56) do 
not output the test tone.

 

Setup closes.
Don’t forget to turn down the volume if 
you turned it up while setting the levels.

HT-SR800_En.book Page 59 Tuesday, January 30, 2007 11:09 AM