ONKYO 29344934 Manual Do Utilizador

21

The speakers can easily be wall mounted by using the 
keyhole slots.

To mount the front or surround speakers vertically, use 
the keyhole slot shown to hang each speaker on a screw 
that’s securely screwed into the wall.

To mount the center speaker horizontally, use the two 
keyhole slots shown to hang each speaker on two screws 
that are securely screwed into the wall.

Caution:
A mounting screw’s ability to support a speaker depends 
on how well it’s anchored to the wall. If you have hollow 
walls, screw each mounting screw into a stud. If there are 
no studs, or the walls are solid, use suitable wall anchors. 
Use screws with a head diameter of 5/16" (8 mm) or less 
and a shank diameter of 5/32" (4 mm) or less. With 
hollow walls, use a cable/pipe detector to check for any 
power cables or water pipes before making any holes.

Leave a gap of between 7/32" 
(5 mm) and 3/8" (10 mm) 
between the wall and the base 
of the screw head, as shown.
(We recommend that you 
consult a home installation 
professional.)

We recommend using the provided rubber stoppers to 
achieve the best possible sound from your speakers. The 
rubber stoppers prevent the speakers from moving, 
providing a more stable platform. Use thick stoppers for 
the center speaker.

If the subwoofer is placed on a hard floor (wood, vinyl, 
tile, etc.) and playback is very loud, the subwoofer’s feet 
may damage the flooring. To prevent this, place the 
supplied pads underneath the subwoofer’s feet. The pads 
also provide a stable base for the subwoofer.

Keyhole slot for wall 
mounting

Keyhole slot for wall 
mounting

Keyhole slot for wall mounting

 7-7/8" (200 mm)

Wall

7/32" – 3/8"
(5 mm) – (10 mm)

Thick rubber stoppers

Bottom of the 
SKC-570

Pad

HT-S5200_En.book  21 ページ  ２００９年３月９日　月曜日　午後４時３１分