ONKYO HT-S3100 Guia Do Utilizador
53
Advanced Setup
Speaker Distance
To get the best from surround sound, it’s important that
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
Notes:
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
• The Surround distances can be set up to 5 ft. (1.5 m)
more or 15 ft. (4.5 m) less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
SurrRight and Surr Left distances can be set between
5 and 25 ft. (1.5 and 7.5 m).
example, if the Front distance is set to 20 ft. (6 m), the
SurrRight and Surr Left distances can be set between
5 and 25 ft. (1.5 and 7.5 m).
Advanced Speaker Settings
1
Measure and make a note of the
distance from each speaker to
the listening position.
distance from each speaker to
the listening position.
2
Press the [RECEIVER] button fol-
lowed by the [SETUP] button on
the remote controller.
lowed by the [SETUP] button on
the remote controller.
MUTING
MENU
TOP MENU
SP A / B
SETUP
RETURN
PLAYLIST
PLAYLIST
RANDOM
SUBTITLE
PLAY MODE
AUDIO
REPEAT
RC-
646
S
--/---
TAPE
ON/STANDBY
DIMMER
SLEEP
INPUT SELECTOR
REMOTE MODE
V
1
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
LISTENING MODE
DISPLAY
OR-EQ
TEST TONE
CH SEL
SURROUND
STEREO
CINE FLTR
LEVEL+
LEVEL-
L NIGHT
VOL
HDD
CDR
MD
DVD
RECEIVER
C D
+10
0
CLR
1
2
3
4
5
6
7
8
9
ENTER
CH
DISC
ALBUM
RETURN
SETUP
RECEIVER
ENTER
The speaker distance setting cannot be
changed while a pair of headphones is con-
nected, speaker set B is on, or the multichan-
nel input is being used.
changed while a pair of headphones is con-
nected, speaker set B is on, or the multichan-
nel input is being used.
SETUP
RECEIVER
3
Use the Up and Down [
]/[
]
buttons to select “2. SP Dis-
tance,” and then press the
[ENTER] button.
tance,” and then press the
[ENTER] button.
4
While “Unit” is displayed, use the
Left and Right [
Left and Right [
]/[
] buttons to
select
feet
or
meters
.
feet:
Distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
from 1 to 30 feet in 1-foot
steps.
meters:
Distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
set from 0.3 to 9 meters in
0.3-meter steps.
5
Use the Down [
] button to
select “Front,” and use the Left
and Right [
and Right [
]/[
] buttons to
specify the distance for the “front
speakers,” then press the Down
[
speakers,” then press the Down
[
] button to select the next
speaker.
6
Repeat step 5 for all speakers.
Note:
Speakers that you set to No or None in
the Speaker Configuration (page 55)
cannot be selected.
the Speaker Configuration (page 55)
cannot be selected.
7
Press the [SETUP] button.
Setup closes.
When you want to go back up one
menu level to “SP Distance,” press the
[RETURN] button.
When you want to go back up one
menu level to “SP Distance,” press the
[RETURN] button.
ENTER
SETUP
HT-S3100_3105_En.book Page 53 Friday, February 1, 2008 9:14 AM