ONKYO SKF-750XF R Manual Do Utilizador

 

16

 

For detailed information, see the pages in parentheses.

 

A

 

Red:

 Subwoofer in standby mode

Blue:

 Subwoofer on

With the Auto Standby function, the SKW-750X 
automatically turns on when an input signal is 
detected in Standby mode. When there’s no input 
signal for a while, the SKW-750X automatically 
enters Standby mode.

 

B

 

This control is used to adjust the volume of the sub-
woofer.

 

C

 

This RCA input should be connected to the sub-
woofer pre out on your AV receiver, amp, or other 
receiver with supplied RCA cable.

 

The Auto Standby function turns the subwoofer on when 
the input signal exceeds a certain level. If the Auto 
Standby function does not work reliably, try slightly 
increasing or decreasing the subwoofer output level on 
the AV receiver (page 81).

 

1

 

These keyhole slots can be used to wall-mount the 
speaker. See page 23 for mounting instructions.

 

2

 

These push terminals are for connecting the speaker 
to your AV Receiver, amp, or other receiver with the 
supplied speaker cables. The supplied speaker 
cables are color-coded for easy identification. Sim-
ply connect each cable to the same-colored positive 
speaker terminal.

 

3

 

These threaded inserts can be used to attach the 
speaker either horizontally or vertically to a speaker 
mount or bracket.

 

Use commercially available 1/4" screws to attach 
the speaker to a speaker mount or bracket.

1

2

3

■ Rear

To AC outlet

■ Front

3
2

1

■ Rear

HT-S6100_En.book Page 16 Tuesday, July 1, 2008 4:58 PM