Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. SKF-750XF R
  5. Manual Do Utilizador

ONKYO SKF-750XF R Manual Do Utilizador

Download
Página de 100
 
75
 
Advanced Setup
 
—Continued
 
Note:
 
• These settings cannot be changed while headphones 
are connected or the multichannel DVD input is being 
used.
 
Crossover Frequency
 
This setting only applies to the speakers that you speci-
fied as 
 
Small
 
 in the “Speaker Configuration” on page 74.
To get the best bass performance from your speaker sys-
tem, you need to set the crossover frequency according 
to the size and frequency response of your speakers
 
Notes:
 
• For a more accurate setting, look up the frequency 
response in the manuals supplied with your speakers 
and set accordingly. 
• Choose a higher crossover frequency if you want more 
sound from your subwoofer.
• These settings cannot be changed while headphones 
are connected or the multichannel DVD input is being 
used.
 
7
 
Use the Down [
] button to 
select “Surround,” and then use 
the Left and Right [
]/[
] but-
tons to select 
 
Small
 
, 
 
Large
 
, or 
 
None
 
.
 
Small:
 
Select if the surround speak-
ers are small.
 
Large:
 
Select if the surround speak-
ers are large.
 
None:
 
Select if no surround speakers 
are connected.
 
Note:
 
Small, the Large option cannot be 
selected.
 
8
 
Use the Down [
] button to 
select “Surr Back,” and use the 
Left and Right [
]/[
] buttons to 
select 
 
Small
 
, 
 
Large
 
, or 
 
None
 
.
 
Small:
 
  Select if the surround back 
speakers are small.
 
Large:
 
  Select if the surround back 
speakers are large.
 
None:
 
  Select if no surround back 
speakers are connected.
 
Notes:
 
• If the Surround setting in step 7 is set 
to None, this setting does not appear.
• If the Surround setting in step 7 is set 
to Small, the Large option cannot be 
selected.
 
9
 
Use the Down [
] button to 
select “Surr Back ch,” and use 
the Left and Right [
]/[
] but-
tons to select 
 
2ch 
 
or 
 
1ch
 
.
 
2ch:
 
Select if two (left and right) 
surround back speakers are 
connected.
 
1ch:
 
Select if one surround back 
speaker is connected.
 
Note:
 
• If the Surround or Surr Back settings 
in steps 7 and 9 are set to None, this 
setting does not appear.
Continue with step 10 of the “Cross-
over Frequency” setting.
 
10
 
Use the Down [
] button to 
select “Crossover,” and then use 
the Left and Right [
]/[
] but-
tons to select a crossover fre-
quency.
 
Use the diameter of the smallest 
speaker in your system when choosing 
the crossover frequency.
 
*Choose the setting suitable for the speaker.
 
Continue with step 11 of the “Double 
Bass” setting on the next page.
This setting is set automatically by the Automatic 
Speaker Setup function (see page 42).
Speaker cone 
diameter
Crossover 
frequency
Over 8 in.
40/50/60Hz*
6-1/2 to 8 in.
80Hz
5-1/4 to 6-1/2 in.
100Hz (default)
3-1/2 to 5-1/4 in.
120Hz
Under 3-1/2 in.
150/200Hz*
HT-S6100_En.book Page 75 Tuesday, July 1, 2008 4:58 PM