ONKYO SKC-750XC Manual Do Utilizador

 

58

 

• Before selecting a different input source, stop iPod 

playback to prevent the AV receiver from selecting the 
iPod input source by mistake.

• If any accessories are connected to your iPod, the AV 

receiver may not be able to select the input source 
properly.

• While your iPod is in the Dock, its volume control has 

no effect. If you adjust your iPod’s volume control 
while it’s in the Dock, make sure it’s not set too high 
before you reconnect your headphones.

 

■

 

You can use your iPod’s Alarm Clock function to auto-
matically turn on your iPod and the AV receiver at a 
specified time. The AV receiver’s input source will auto-
matically be set to the input to which your iPod is con-
nected.

 

■

 

The Dock charges your iPod’s battery while your iPod is 
in the Dock and connected to the DOCK jacks on the AV 
receiver. While your iPod is seated in the Dock, its bat-
tery will be charged when the AV receiver is set to On or 
Standby.

Notes:
• To use this function, your iPod must be in the Dock, 

and the Dock must be connected to the AV receiver.

• When you use this function, be sure to set the AV 

receiver’s volume control to a suitable level.

• The AV receiver may take several seconds to star-

tup, so you might not hear the first few seconds of 
the first song.

HT-S6100_En.book Page 58 Tuesday, July 1, 2008 4:58 PM