ONKYO SKM-340S Manual Do Utilizador

 

42

 

This chapter explains functions that can be used with any input source.

You can connect a pair of stereo headphones (1/4-inch 
phone plug) to the AV receiver’s PHONES jack for pri-
vate listening, as shown.

 

• Always turn down the volume before connecting your 

headphones.

• Speaker sets A and B are turned off while the head-

phones plug is inserted in the PHONES jack.

• When you connect a pair of headphones, the listening 

mode is set to Stereo, unless it’s already set to Mono, 
Stereo, or Direct.

• When the multichannel DVD input is selected, only 

the front left and front right channels can be heard in 
the headphones.

With this function, you can adjust the brightness of the 
display.

You can adjust the bass or treble for speaker set A’s front 
speakers, except when the Direct listening mode is 
selected.

 

■

 

You can boost or cut low-frequency sounds output by the 
front speakers from –10 dB to +10 dB in 2 dB steps.

 

■

 

You can boost or cut high-frequency sounds output by 
the front speakers from –10 dB to +10 dB in 2 dB steps.

 

• To bypass the bass and treble tone circuits, select the 

Direct listening mode.

 

Alternatively, you can use the [DIM-
MER] button on the AV receiver (not 
European models).

HT-S590_En.book Page 42 Wednesday, February 1, 2006 4:26 PM