ONKYO HT-S5300 Manual Do Utilizador

En

You can use the AV receiver’s remote controller 
(RC-764M) to control your other AV components. This 
section explains how to enter the remote control code 
(with the default underlined) for a component that you 
want to control: DVD, TV, CD, etc.

The following REMOTE MODE are preprogrammed 
with remote control codes for controlling the components 
listed. You do not need to enter a remote control code to 
control these components.
For details on controlling these components, see the pages 
indicated.

You’ll need to enter a code for each component that you 
want to control.

Onkyo components that are connected via 

u are con-

trolled by pointing the remote controller at the AV 
receiver, not the component. This allows you to control 
components that are out of view, in a rack, for example.

If you want to control an Onkyo component by pointing 
the remote controller directly at it, or you want to control 
an Onkyo component that’s not connected via 

u, use the 

following remote control codes:
• BD/DVD

`

30627: 

Onkyo DVD player without 

u

• TV/CD

`

71817: 

Onkyo CD player without 

u

`

11807: 

Onkyo TV

Onkyo Blu-ray Disc player (

Onkyo CD player (

Onkyo Universal Port Option (

Look up the appropriate remote control code in 
the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD 
player, TV, etc.).

• Remote control codes cannot be entered for RECEIVER 

and ZONE 2.

• Only TV remote control codes can be entered for TV.
• Apart from RECEIVER, TV, and ZONE 2, remote con-

trol codes from any category can be entered for REMOTE 
MODE. However, these buttons also work as input selec-
tor buttons (

22), so choose a REMOTE MODE that 

corresponds with the input to which you connect your 
component. For example, if you connect your CD player 
to the CD input, choose TV/CD when entering its remote 
control code.

Within 30 seconds, use the number buttons to 
enter the 5-digit remote control code.
The remote indicator flashes twice.
If the remote control code is not entered success-
fully, the remote indicator will flash once slowly.

u

u cable and an analog audio cable 

u Components” for 

details (

Enter the appropriate remote control code for 
REMOTE MODE.
• BD/DVD

`

31612: 

Onkyo DVD player with 

u

• TV/CD

`

71327: 

Onkyo CD player with 

u

`

42157:

Onkyo cassette tape deck with 

u

• PORT

`

81993: 

Onkyo Dock

See the previous section for how to enter remote 
control codes.

• When using a cassette tape deck connected via 

u, press 

and hold TV/CD to switch to TAPE.